power-button board cable
Replacing the Power Button Board
1 Follow the instructions in "Before You Begin" on page 9.
2 Using the alignment post, place the power button board on the palm rest
assembly and snap it into place.
3 Replace the screw that secures the power button board to the palm rest.
4 Turn the palm-rest assembly over.
5 Follow the instructions from step 3 to step 7 in "Replacing the Palm-Rest
Assembly" on page 32.
6 Replace the battery. See "Replacing the Battery" on page 14.
stray screws remain inside the computer. Failure to do so may result in damage to
Power Button Board
Before turning on the computer, replace all screws and ensure that no
power button board