Specifications - JVC RX-5060B - AV Receiver Instructions Manual

Specifications

Amplifier
Output Power
Audio
Audio Input Sensitivity/Impedance (1 kHz)
CD, TAPE/CDR, VCR, TV SOUND, DVD, AUX:
Audio Input (DIGITAL IN)*
Coaxial
Optical
* Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround (with sampling frequency—32 kHz, 44.1 kHz,
48 kHz)
Recording Output Level
Signal-to-Noise Ratio ('66 IHF/'78 IHF)
CD, TAPE/CDR, VCR, TV SOUND, DVD:
Frequency Response (8 Ω)
CD, TAPE/CDR, VCR, TV SOUND, DVD, AUX:
Equalization (5 bands) 63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz:
Video
Video Input Sensitivity/Impedance
Composite video
Video Output Level
Composite video
Synchronization:
Signal-to-Noise Ratio:
FM tuner (IHF)
Tuning Range:
Usable Sensitivity
50 dB Quieting Sensitivity
Stereo Separation at OUT (REC):
AM tuner
Tuning Range:
General
Power Requirements:
Power Consumption:
Dimensions (W x H x D):
Mass:
34
100 W per channel, min. RMS, driven into 8 Ω, at 1 kHz with no
Front channels:
more than 10% total harmonic distortion.
100 W, min. RMS, driven into 8 Ω, at 1 kHz with no more than 10%
Center channel:
total harmonic distortion.
100 W per channel, min. RMS, driven into 8 Ω, at 1 kHz with no
Surround channels:
more than 10% total harmonic distortion.
220 mV/47 kΩ
0.5 V(p-p)/75 Ω
DIGITAL 1 (DVD):
DIGITAL 2 (CD): –21 dBm to –15 dBm (660 nm ±30 nm)
TAPE/CDR, VCR: 220 mV
66 dB/71 dB
20 Hz to 20 kHz (±1 dB)
±8 dB (in 2 dB steps)
1 V(p-p)/75 Ω
DVD, VCR, AUX:
1 V(p-p)/75 Ω
VCR, MONITOR OUT:
Negative
45 dB
87.5 MHz to 108.0 MHz
12.8 dBf (1.2 µV/75 Ω)
Monaural:
16.0 dBf (1.7 µV/75 Ω)
Monaural:
37.5 dBf (20.5 µV/75 Ω)
Stereo:
35 dB at 1 kHz
530 kHz to 1 710 kHz
AC 120V
155 W/200 VA (at operation)
0.8 W (in standby mode)
435 mm x 146.5 mm x 369.5 mm
7.0 kg
, 60 Hz
Designs and specifications are subject to change without notice.