Installing A Secure Digital (Sd) Card - HP iPAQ rx4200 - Mobile Media Companion User Manual

Installing a Secure Digital (SD) Card

To install an SD card into the SD slot on your HP iPAQ:
1. Locate the SD slot on your HP iPAQ.
2. Remove the protective plastic card.
3. Insert the SD card into the SD slot and push the connection edge of the card firmly into the SD slot.
NOTE
If you have trouble installing an SD card, try the following:
● Have the label face the front of the HP iPAQ.
●
Insert the connection area (the metal area) first.
●
Do not insert the card at an angle.
66 Chapter 9 Secure Digital (SD) Cards
If the SD card is not recognized, follow the card manufacturer's instructions to install it.
ENWW