Connecting The Cables And Power Cord - HP 245161-B22 - 10642 42U Rack Shock Pallet Reference Manual

Connecting the Cables and Power Cord

To connect the cables and power cord:
1. Connect appropriate cables to the component.
2. Connect the power cord by doing the following:
a. Remove the label covering the AC power outlet.
b. Set the input voltage selection switch to the appropriate position.
c. Connect the AC power cord to the unit.
Figure 4-17: Connecting the AC power cord to the
component
HP 10842 Rack Reference Guide
Installing Components in the Rack
4-21