Electrolux ELCO 900 Specifications

Elco 900
100 litre electric bratt pans
The Electrolux 900-Line of modular cooking equipment is designed to meet the heavy duty cooking
requirements of institutional caterers and the larger restaurants and hotel kitchens. The flexibility of the
modular design, with innumerable configurations either free-standing, bridged or cantilever, can be precisely
tailored to meet the needs of the caterer. The models detailed in this sheet are 100 litre electric bratt pans.
EASY TO INSTALL
•
Main connections can be via the
base of the unit.
•
All models provided with service
duct to facilitate installation.
•
All models can be installed on
cantilever system.
EASY TO CLEAN
•
Well and double skinned
lid/worktop in 304 AISI stainless steel.
•
Front, side, rear and bottom panels
in stainless steel with Scotch Brite
finish.
•
All models have right-angled side
edges to allow flush-fitting joins
between units, eliminating gaps and
possible dirt traps.
•
The special design of the control
knob system guarantees against
water infiltration.
EASY TO USE
•
Armoured elements in 304 AISI
stainless steel mounted under the
external base of the well.
•
Thermostatically controlled
temperature from 120°C to 300°C.
There is also an energy regulator to
accurately control the energy input (to
prevent food sticking to the well base).
•
Safety thermostat.
•
Choice of well cooking surface in
mild steel or compound (3 mm of 316
AISI stainless steel on top of 12 mm
of mild steel).
•
Mild steel: dry cooking and regular
frying.
•
Compound: like mild steel but also
damp cooking.
•
All the Bratt Pans incorporate an
AISI tap as standard.
•
Angled control panel for easy
viewing, featuring recessed controls
and a hand wheel with retractable
handle for the tilt mechanism (for
manual tilt models).
EASY TO MAINTAIN
•
IPX5 water protection.
EASY ON THE ENVIRONMENT
•
98% recyclable by weight.
•
CFC free packaging.
210309