Standby Power Save; Intelligent Auto Standby - Panasonic TXL42D25 Operating Instructions Manual

Link Functions
■
Features available
Reduce unnecessary power consumption in standby
Set Standby Power Save "On" in the Setup Menu to use this function
"Standby Power Save" (p. 34)
The power consumption in Standby mode of the connected equipment is controlled in synchronization with the
TV On / Off state.
When the TV is set to Standby mode, the connected equipment is automatically set to Standby and the power
consumption in Standby mode of the connected equipment is automatically minimized.
When the TV is turned on and the connected equipment is still in Standby mode, the power consumption of the
connected equipment is increased to reduce the startup time.
●
This function is effective if the connected equipment can change the power consumption in Standby mode
and is set to higher consumption.
Auto standby for unnecessary equipment
Set Intelligent Auto Standby "On (With reminder)" or "On (No reminder)" in the Setup Menu to
use this function
"Intelligent Auto Standby" (p. 34)
When the TV is On, non-watched or non-used connected equipment goes into Standby mode automatically
to reduce power consumption. For example, when the input mode is switched from HDMI, the connected
equipment will go into Standby mode / when Speaker Selection is changed to "TV", the Player theatre will go
into Standby mode (except when watching a disc).
●
If you select "On (With reminder)", the on screen message will be displayed before the connected equipment
turns to Standby.
●
This function may not work properly depending on the connected equipment. If required, set to "Off".
■
Features available
Direct TV Recording -
Recording the current programme on a DIGA Recorder immediately.
●
If you connect a variety of recorders including other manufacturers' recorders at the same time, please
connect the DIGA Recorder to the TV's lower HDMI terminal number. For example, if you use HDMI1 and
HDMI2 for two recorders, connect the DIGA Recorder to HDMI1.
●
If Direct TV Recording does not operate, check the settings and the equipment
"Summary of Q-Link and VIERA Link features" (p. 84 and p. 85), "Preparations" (p. 87)
●
If you wish to record a programme that the DIGA Recorder does not support, a SCART connection is required
and the programme is recorded by Q-Link function (p. 86).
●
Depending on the programme, a SCART connection may be required to record.
●
Changing channel or turning off the TV is available while the recorder is recording from its own tuner.
●
Changing channel is not available while the recorder is recording from the TV tuner.
88
(Using VIERA Link Menu)
What you see is What you record
Display "VIERA Link Menu"
1
DIRECT TV REC
Select "Direct TV Rec" and start recording
2
EXIT
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
●
You can also start recording directly
■
To stop recording
Select "Stop" in "Direct TV Rec" and access
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
●
You can also stop recording directly.
(
Q-Link
VIERA Link

Intelligent Auto Standby

Direct TV Rec
Start
Start
Recorder
Home Cinema
Start
Stop
Recorder
Home Cinema
Unlock the tuner
Tuner Locked
Press EXIT to unlock and stop recording
Unlock
Continue
)

Standby Power Save

start
select
DIRECT TV REC
select
stop
EXIT