Remote Control - Sanyo CE42LM4WPN-NA - CE - 42" LCD Flat Panel Display Instruction Manual

TV/AV switch
To switch from AV1, RGB, AV2, AV3, PC or HDMI mode
press repeatedly.
Press and hold in a few seconds, an AV selection
bar appears. Select the mode you require using the
Screen mode selector
To select the screen mode, Auto, Natural, Full
Zoom 16:9, Title 16:9,Zoom 14:9,title 14:9 or Normal.
Refer to page 11.
MENU
To enter and exit sub menus.
Cursors up/down
To adjust the menu levels .
Picture mode selection
Press the button repeatedly to select the following
picture modes.
Personal - Personal preference mode.
Dynamic - Suitable for brightly lit rooms.
Standard - Normal viewing mode.
Eco - Suitable for dimly lit rooms and gives a
cinema - like effect.
F/OK
To save the setting in the menu.
6

REMOTE CONTROL

REMOTE CONTROL
keys
JXPLA
Standby
To switch the monitor on and off. Also see page 8
Program information call
To display the program information.
You can also select colour systems in AV mode as follows
AUTO -> PAL -> SECAM -> NTSC3.58
up and down
To select the next item