Haier HLTD7 Instruction Manual page 23

3. MAIN MENU
The unit contains different setting menus. Once the initial programming is entered it is
retained in memory until changed, the TV can always be operated under the same
conditions.
The settings will be retained in the memory until the settings are changed.
Common procedure for initial settings
1. Press TV MENU button.
2. Use the left or right button to select preferred page, each page for setting the value will
display. Then move the up or down button to set.
3. Press TV MENU button again to return to current setting item.
4. Press EXIT to leave the setting menu .
1. PICTURE SETUP
- Press the TV MENU button the screen will display:
- When the menu displays on the screen, press the TV MENU button again to exit.
- Press EXIT to exit all menus.
Picture mode
Press up or down button to select it, then press left or right button to set the picture mode as
Personal, Standard, Dynamic or Soft.
Contrast/Brightness/Sharpness/Tint/Color
- Press up or down button to select Contrast/Brightness/Sharpness/Color, then press left or
right button to adjust.
- The Contrast/Brightness/Sharpness/Color can be adjusted from 0-100.
- The Tint can be adjusted from -50 to 50.
22