HP Kayak XW A2-U2-W2 Handbook page 19

A
Beep Codes for the HP Kayak XU800
Number
of
Beeps
1
2
3
4
5
6
7
8
A-2 Beep, POST, and Error Codes
Description
The memory refresh
circuitry is faulty.
Parity error in the base
memory (the first 64 KB
block) of memory.
Memory error.
Clock error.
Processor test error.
Input/Output (I/O) error.
The processor on the
system board generated
an error.
The system video card is
either missing or faulty.
Action to Take...
Check that:
• Memory is installed correctly.
• Correct memory modules are being used.
If the error still occurs, replace the memory.
• Check that the system board is correctly
cabled (power cables, processor and
terminator).
If the error still occurs, replace the system
board.
Check that:
• Processor is correctly installed.
• Termination card installed in processor
slot 2 in a single processor system.
If the error still occurs, replace:
1 Processor.
2 system board.
• Keyboard is connected.
• PCI card is installed correctly.
• Termination card installed in processor
slot 2 in a single processor system.
• There is an installed processor(s).
• Processor(s) is correctly installed in the
processor slot(s).
• Two installed processors have the same
cache size (256 k).
• Termination card is installed in processor
slot 2 in a single processor system.
• VRM is installed in the VRM socket in a
dual processor system.
If the error still occurs, replace the system
board.
This is not a fatal error. Check that the video
card is correctly installed and cabled. If
missing, install the video card. If the error
still occurs, replace it with a known working
video card.