Turning The Hp Touchsmart Pc On And Off; Turning On The Hp Touchsmart Pc; Turning Off The Hp Touchsmart Pc - HP IQ525 - TouchSmart - 4 GB RAM Getting Started Manual

Turning the HP TouchSmart PC On and Off

Turning on the HP TouchSmart PC

After you finish setting up your HP TouchSmart PC, press the Power/Sleep button (A) on the top-right
side of the computer to turn it on. Complete the initial setup by following the onscreen instructions.
Please be patient while the setup process completes; it may take several minutes.
You can also turn on the HP TouchSmart PC or put it into Sleep mode by pressing the Power/Sleep button
on the keyboard or the remote control. A remote control is included with select models only.
After you have turned on the computer for the first time, and gone through all the setup wizards, you
can use the HP TouchSmart button (B) to turn on the computer and open the HP TouchSmart software.
If the computer is already turned on, you can press this button to open the HP TouchSmart window.

Turning off the HP TouchSmart PC

Tap the Windows Vista start button, tap the Arrow button next to the Lock icon, and
then select Shut Down.
12
Getting Started (Features may vary by model)
A
B