Download  Print this page

Building Over A Kitchen Unit With Door - AEG GAS HOB 69802 G Operating Instructions Manual

Electrolux cooktop user manual
Hide thumbs

Advertisement

Instructions for the Installer

Building over a kitchen unit with door

Proper arrangements must be taken in
designing the furniture unit, in order to
avoid any contact with the bottom of the
hob which can be heated when it is
operated. The recommended solution is
shown in diagram 3.
The panel fitted under the hob ("a")
should be easily removable to allow easy
access if technical assistance is needed.
The space behind the kitchen unit ("b")
can be used for connections.
Fitting the hob to the worktop
Before fitting the hob into the cut out,
an adhesive seal must be fitted to the
underside outside edge of the hob. It
is essential that no gaps are left in this
seal in order to prevent spillage near
the hob seeping into the cabinet
below.
1) Remove the pan supports, the
burners caps and crowns and turn
the hob upside down, taking care
the ignition candles are not
damaged in this operation.
2) Place the sealing gasket all
around the glass top edge as
shown in the diagram.
3) Fit the hob in the cut out and push
it down until the glass top and the
working top make contact, as
shown in the diagram.
16
3
a
60
b
Dimensions are given in mm.
FO 1013
FO 2107
A) Sealing gasket
FO 2108
A

Advertisement

loading

  Related Manuals for AEG GAS HOB 69802 G

This manual is also suitable for:

69802 g