Basic Steps For Embroidering - Brother Simplicity SB7050E Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
GETTING READY

Basic Steps for Embroidering

This section describes the preparations for embroidering.
The basic steps for embroidering are as follows.
1 Embroidery unit attachment
2 Needle preparation
3 Bobbin thread setup
4 Fabric preparation
Embroidery frame
5
attachment
Pattern selection
6
7 Upper thread setup
Checking the layout
8
16
Attach the embroidery unit.
For details, refer to "Attaching the embroidery unit" (page 19).
Use a needle matched to the fabric.
For details, refer to "Replacing the needle" (page 28).
For the bobbin thread, wind embroidery bobbin thread and set it in
place.
For details, refer to "Winding/Installing the Bobbin" (page 29).
Attach a stabilizer material to the fabric, and hoop it in an embroidery
frame.
For details, refer to "Preparing the Fabric" (page 43).
Attach the embroidery frame to the embroidery unit.
For details, refer to "Attaching the Embroidery Frame" (page 47).
Select an embroidery pattern.
For details, refer to "Selecting Embroidery Patterns" (page 50).
Set up the upper thread according to the selected pattern.
For details on setting up the thread, refer to "Upper Threading" (page 37).
Check and adjust the size and position of the embroidery pattern.
For details, refer to "Adjusting the layout and the size" (page 62).