Table of Contents
Advertisement
Adobe Acrobat SDK
Adobe® Supplement to the ISO 32000
KEY
N2
TP
TX
TY
TS
C
V
P
UT
DR
S
TABLE 9.39d Additional entries in a 3D measurement/markup dictionary
for a 3D angular dimension measurement
TYPE
VALUE
text string
(Optional; ExtensionLevel 3) The name of the part (or model tree node)
associated with anchor point 2 (
the part exists and is visible. If not, the measurement is not displayed. If
omitted, no validation occurs.
array
(Required; ExtensionLevel 3) A three-element array of numbers specifying
the text anchor point for the measurement value string.
array
(Required; ExtensionLevel 3) A three-element array of numbers specifying
the horizontal direction vector for the text string presenting the
measurement value string.
array
(Required; ExtensionLevel 3) A three-element array of numbers specifying
the up direction vector, called the text Y direction, for the text string
presenting the measurement value string.
number
(Optional; ExtensionLevel 3) A number representing the measurement
text string height defined in points in the default user space. Note that
measurement text is zoom invariant.
The default is 12 points.
array
(Optional; ExtensionLevel 3) An array of three numbers in the range 0.0
to 1.0, representing the RGB color of the measurement markup.
The default value is the array
number
(Required; ExtensionLevel 3) A numeric value representing a
measurement value. This value is converted to a text string and
displayed as part of the measurement text string.
integer
(Optional; ExtensionLevel 3) The number of decimal digits, which
represents the precision, shown for the measurement value (
The default is
text string
(Optional; ExtensionLevel 3) A string defined by the user that is
appended to the end of measurement value string. If omitted, no string
is appended.
boolean
(Optional; ExtensionLevel 3) A flag that indicates whether degrees or
radians are shown in angular measurements. If
measurements are shown in degrees.
The default is
dictionary
(Optional; ExtensionLevel 3) A comment reference is an indirect reference
to a projection annotation that may be associated with this 3D
measurement. See
page
Multimedia Features (Chapter 9 in PDF Reference)
9.5.6 Persistence of 3D Measurements and Markups
, if
is not specified.
3
P
.
true
"3D Measurements and Projection Annotations" on
75.
). The part name is used to verify that
A2
, representing the color white.
[1 1 1]
is
DR
true
69
).
V
, angular
Advertisement
Table of Contents
