Hob - Daily Use - Electrolux EKC607601 User Manual

6 electrolux
Important! Refer to chapter "Care and
Cleaning".
SETTING THE TIME
The oven only operates after time set.
When you connect the appliance to the
electrical supply or in case of a power cut,
the Time function indicator flashes automat-
ically.
To set the current time use
After approximately 5 seconds, the flashing
stops and the display shows the time of
day set.
You can only change the Time of
day if :
• the switch-on lock is not on
• none of the clock functions Duration
or End
• no oven function is set.
Preheat the two ovens. Heat up one oven
at a time.

HOB - DAILY USE

Warning! Refer to "Safety information"
chapter.
CONTROL PANEL LAYOUT
10
Use the sensor fields to operate the appliance.
1
with an indicator
2
/
3
a heat setting display
4
cooking zone's indicators of timer
or button.
is set
1 2
9 8
sensor field
PRE-HEATING
1. Set function
ature.
2. Let the appliance operate without the
food for approximately 1 hour.
3. Set function
ature.
4. Let the appliance operate without the
food for approximately 10 minutes.
5. Set function
ature.
6. Let the appliance operate without the
food for approximately 10 minutes.
This is to burn off the residue in the appli-
ance. The accessories can become more
hot than usually. When you pre-heat the
appliance for the first time, the appliance
can make an odour and smoke. This is the
usual effect. Make sure the airflow is suffi-
cient.
3 4 5
7
locks/unlocks the control panel
increase or decrease heat setting / time
shows the heat setting
shows for which zone you set the time
and maximum temper-
and maximum temper-
and maximum temper-
6
function