Audio Setting; System Information - Yamaha BD-A1020 Owner's Manual

Noise Reduction
You can set the Noise Reduction to a level of 0 to 3. 0 is
off, and 3 is the maximum level.
*
0, 1, 2 , 3
De-interlacing Mode
You can select how to detect the video signal. Set to Auto
for normal use. When horizontal stripping noise appears
on the screen, set this to Film/Video to remove the noise.
*
Auto , Film, Video

■ Audio Setting

The default settings are marked with "
Audio Output
Coaxial / Optical
You can select the output mode of COAXIAL jack and
OPTICAL terminal. For more details on output formats,
refer to "About the audio output formats" (p. 38).
Bitstream Outputs digital signal without any processing.
Secondary Audio is not output.
PCM Outputs 2-channel PCM.
Reencode * Outputs Bitstream with Secondary Audio.
Off
Mutes sound.
HDMI
You can select the output mode of HDMI terminal. For
details on setting items, see "Coaxial / Optical" (p. 37). For
more details on output formats, refer to "About the audio
output formats" (p. 38).
Bitstream * , PCM, Reencode, Off
Note
– To output HD audio (Dolby TrueHD or DTS-HD
Master Audio) from HDMI terminal, set Video Out
Select to Auto or more than 720p (p. 36).
Downsampling
You can select digital audio signal down-sample
frequency. This function is effective for the audio signal
output from the COAXIAL jack/OPTICAL terminal.
* The highest sampling rate of digital PCM output is
48K
48 kHz.
96K
The highest sampling rate of digital PCM output is
96 kHz.
192K The highest sampling rate of digital PCM output is
192 kHz.
DRC
You can set the DRC (Dynamic Range Compression)
(p. 44) to on/off/Auto. When set to Auto, DRC is
automatically turned on for a source with DRC
information in Dolby TrueHD format. DRC makes the
strong sound such as plosive sound lower, and
conversations more audible. It is useful when you watch
movies in the night.
*
Off, On, Auto
SACD Output
Output Priority
You can select the output priority from HDMI or Analog
for playing back SA-CDs.
HDMI
Analog
Note
".
*
– Selecting Analog mutes the HDMI output when SA-
SACD Priority
Selects the playing back priority for 2-channel contents or
multi-channel contents, when the disc contains both types
of contents.
Multi-ch
HDMI Output
You can select audio signal output from HDMI terminal
when SA-CD is played back.
DSD
PCM
Speaker Setting
2ch Downmix
You can select down mix method to analog 2-ch from
Stereo or Lt/Rt.
Lt/Rt
Stereo
Post Process
UpMix
You can multi-channelize the 2-channel audio signal. To
multi-channelize, select DTS NEO:6, then select Cinema
or Music mode.
*
Off , DTS NEO:6

■ System Information

Software version and MAC address (p. 45) are displayed.
* The settings for SACD Priority and HDMI Output
are applied.
Always plays back the SA-CD's high quality 2-
channel area. The signal is fully optimized for analog
2-channel outputs to be best quality.
CD is played back. See page 38 for information on
the SA-CD output formats.
*
, 2-ch
* Outputs DSD raw signal. When this Player is
connected to DSD compatible AV receiver, this item
is recommended.
Outputs PCM signal decoded by this Player.
Select this item if this unit is connected to a Dolby
Pro Logic decoder. Sound from rear speakers is
mixed to the 2-ch stereo sound.
* Changes channel output to stereo, which only
delivers sound from the two front speakers.
SETUP menu
4
37
En