Replacing the LCD Bezel
1. Place the bezel on top the LCD panel and then press the bezel on all sides until it snaps
into place.
NOTE:
NOTE:
Make sure that the LCD, microphone, and antenna cables are properly routed on the
hinge sides and there is no gap between the bezel and the LCD cover.
Figure 1-115. LCD Bezel
2. Secure the bezel with the two screws.
Figure 1-116. LCD Bezel Screws
Table 3-25. Screws
Step
LCD Bezel Assembly
Machine Maintenance
Screw
M2.5 × L4
Quantity
Screw Type
2
0
3-69