Removing The Touchpad Board - Acer TravelMate P653-M Service Manual

Removing the Touchpad Board

1. Perform the "Removing the Palmrest Module/Upper
page 3-24.
2. Open the connector latches for the touchpad and fingerprint board cables (a) and then
disconnect the cables (b).
Figure 1-47. Touchpad and Fingerprint Board Cables
3. Remove the screws securing the touchpad bracket.
Figure 1-48. Touchpad Bracket Screws
Table 3-13. Screw
Step
Touchpad Bracket Disassembly
Machine Maintenance
Touchpad
cable
M2 × L3
Cover" procedure described on
Fingerprint
board cable
Screw Quantity
4
0
Screw Type
3-33