Download  Print this page

Temperature Gauge Operation Inspection - KAWASAKI ZX400-H2 Quick Reference Manual

Quick reference guide (part 3).
Hide thumbs

Advertisement

Table of Contents
15-32 ELECTRICAL SYSTEM
Water Temperature Gauge Operation Inspection
• Prepare an auxiliary wire, and check the operation of the
gauge.
Gauge Operation Test
Ignition Switch Position: ON
Wire location:
Water
temperature
sensor
female connector
(disconnected)
Results:
Gauge should read C when sensor wire
is opened.
Gauge should read H when sensor wire
is grounded to
engine.
B.
Water Temperature Gauge
CAUTION
Do not ground the wiring longer than necessary. After
the pointer swings to the H
position.
stop th
e
test.
Otherwise the gauge could be damaged
.
.Check the water temperature gauge circuit
wiring
(see
Wiring Inspection).
.If all w
iring
and components other than the water
temperature gauge unit check out good. the gauge is
defective.
A. Sensor Connector
*
If these readings are not correct. the trouble is w
ith
the
gauge
and/or
w
iring.
B.
Pointer flicks.
A.
Tachometer

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: