Download  Print this page

KAWASAKI ZX400-H2 Quick Reference Manual Page 36

Quick reference guide (part 3).
Hide thumbs

Advertisement

ELECTRICAL SYSTEM 15-15
(D@
o
The actual meter reading varies with the meter used and
the individual
diode,
but, generally speaking, the lower
reading should be from zero to one half the
scale.
.Connect the brown lead terminal to the other battery
(
+)
terminal and connect the black/yellow lead terminal
to the battery ( -) terminal
momentarily.
At this time the
bulb should not be lit.
4. Y, Lead Terminal
5. Y2 Lead Terminal
6.
Y3 Lead Terminal
NOTE
@@@
1.
W Lead Terminal
2.
BR Lead Terminal
3.
BK/Y Lead Terminal
.To
apply
24
V to the
regulator/rectifier,
connect two
12
V batteries in
series,
and connect the brown lead
terminal
to
the
battery
(+)
terminal
and
the
black/yellow lead terminal to the battery (-) terminal
momentarily. The bulb should now light and stay on
until the bulb circuit is opened.
Regulator Inspection
To test the regulator out of circuit, use three 12 V
batteries and a test light made from 12 V 3 -- 6 W bulb
in a socket with leads.
• Remove the regulator/rectifier unit from the frame.
• Using auxiliary leads, connect one of the yellow lead
terminal at the unit to the battery (+) terminal, and
connect the test light between the black/yellow lead
terminal at the unit. and the battery (-) terminal.
.At
this time the bulb should not be lit.
1. Regulator/Rectifier
2.
Test Light
3. 1 2 V Battery
4. 1
2
V Battery
5. W Lead Terminal
6. BR Lead Terminal
7.
BK/Y Lead Terminal
8.
Y, Lead Terminal
9.
Y2 Lead Terminal
10.
Y3 Lead Terminal
®
(j)
CD @
@
@
1.
Regulator/Rectifier
2.
Test Light
3.
12
V Battery
4.
BK/Y Lead Terminal
5. Y, Lead Terminal
6. Y2 Lead Terminal
7. Y3 Lead Terminal
1.
Regulator/R ectifier
2.
Test Light
3.
12
V Battery
4.
1
2
V Battery
5.
1
2
V Battery
6.
BR
Lead
Terminal
7.
BK/Y
Lead Terminal
8.
Y,
Lead
Termina
l
9.
Y2
Lead
Terminal
10. Y3
Lead
Terminal
CAUTION
The test
l
ight works as an indicator and also as a
current limiter to protect the
regulator/rectifier
from
excessive current.
Do not use an ammeter
instead o
f
a
t
est li
g ht.
CAUTION
Do not apply more than 24
volts.
If more t
han
24 volts
is applied. the
regulator/rectifier
may be damaged
.
Do
not apply 24 V more than a
f
ew
seconds.
If 24 volts is
ap p l ied
for
more
t
han
a
f
ew
sec o n d
s.
t
he
regulator/rectifier
may be damaged.

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: