Speakers And Sound; Internet Access - HP ENVY 20-d000 Quick Setup Manual

Speakers and sound

Symptom
No sound is
produced.
Volume is very low
or unsatisfactory.

Internet access

Symptom
Internet programs
do not start
automatically.
Possible solution
1. From the Start screen, type c, select Control Panel, and then select System and
Security.
2. Under Action Center, select Troubleshoot common computer problems, and
then select Troubleshoot audio playback.
If you are using built-in monitor speakers, use the monitor front-panel Volume button to
adjust volume. Use the front-panel buttons to enter the on-screen display (OSD) and
ensure that audio is enabled and that the volume is set appropriately.
Ensure that you connected powered (active) speakers and that they are turned on.
Turn off your computer, and then unplug and reconnect the speakers. Ensure that the
speakers are connected to an audio connector, not a Line In or headphone connector.
To resume from Sleep mode, press the Sleep button (select models only), or press Esc.
Unplug headphones if they are connected to your computer (or speaker system).
Ensure that you connected the speakers to the Audio Out connector on the back of the
computer. (Additional audio connectors are used for multiple-channel speakers.)
Detached non-powered speakers (speakers without a separate power source, such as
batteries or a power cord) do not produce satisfactory sound. Replace the non-powered
speakers with powered speakers.
Possible solution
Log in to your ISP, and start the desired program.
Speakers and sound
13