Introduction; Overview; Running Rbsu - HP ProLiant DL380e User Manual

Introduction

Overview

HP ProLiant Generation 2 and later servers have a configuration utility embedded in the system ROM. The
configuration utility, RBSU, starts when you press the F9 key from the startup sequence.
RBSU performs a wide range of configuration activities that may include:
•
Configuring system devices and installed options
•
Displaying system information
•
Selecting the primary boot controller
•
Configuring online spare memory
IMPORTANT:
server options.
Based on the generation of the server blade, this user guide is divided into two sections:
•
HP ProLiant G7 servers or server blades
page 9)
•
HP ProLiant G6 and earlier servers or server blades (including the HP ProLiant servers and server
blades with AMD processors)
page 103)

Running RBSU

To run RBSU and modify configuration settings, press the F9 key when prompted during the startup
1.
sequence.
Modify configuration settings as needed.
2.
Exit RBSU by pressing Esc at the main menu. To confirm configuration setting changes, reboot the
3.
system when exiting RBSU.
Menu options may differ from those in this document, depending on specific
("RBSU menu (HP ProLiant G7 servers or server
("RBSU menu (HP ProLiant G6 and earlier servers or server
blades)" on
blades)" on
Introduction 7