Table of Contents
Advertisement
Top cover
Description
Top cover with TouchPad
Before removing the top cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
If your computer has WWAN capability, remove the SIM (see
6.
Remove the memory module (see
7.
Remove the keyboard (see
8.
Remove the hard drive assembly (see
Remove the top cover.
1.
Turn the computer upside down, with the front toward you.
2.
Use a thin, flat tool to release the 4 rubber feet.
3.
Remove the 4 Phillips PM2.5×6.0 screws (1), and the Phillips PM2.0×4.0 screw (2) that secure
the top cover to the base enclosure.
4.
Turn the computer right-side up, with the front toward you.
5.
Open the computer as far as possible.
Battery on page
35).
Memory module on page
Keyboard on page
39).
Mass storage devices on page
Spare part number
537622-001
SIM on page
36).
37).
43).
Component replacement procedures
45
Advertisement
Table of Contents
