Hardware Options Installation; Introduction; Processor Option; Optical Drive Option - HP ProLiant DL140 - G2 Server User Manual

Hardware options installation

Introduction

If more than one option is being installed, read the installation instructions for all the hardware options
and identify similar steps to streamline the installation process.
For HP-supported options, refer to the Quickspecs on the HP website
(http://www.hp.com/servers/proliant).
WARNING:
internal system components to cool before touching them.
CAUTION:
beginning any installation procedure. Improper grounding can cause electrostatic discharge.
CAUTION:
server and the equipment

Processor option

For server-specific processor installation instructions, refer to the installation instructions included with the
processor option kit.
CAUTION:
processors of different types or speeds.

Optical drive option

For server-specific optical drive installation instructions, see the installation sheet included with the option
kit.

Memory options

For server-specific memory installation guidelines, refer to the installation sheet included with the server.

PCI I/O device option

For server-specific PCI I/O device installation instructions, see the installation instructions included with the
PCI I/O device option kit.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to electrical components, properly ground the server before
Before installing any options, power down the server to prevent damage to the
("Power down the
To prevent possible server malfunction and damage to the equipment, do not mix
server" on page 5).
Hardware options installation 12