Specifications - Sony BDP-S4100 Operating Instructions Manual

, When "D ON" appears, contact your
Sony dealer or local authorised Sony
service facility.
The disc tray does not open and you
cannot remove the disc even after you
press Z.
, Try the following:
off, and disconnect the mains lead.
Reconnect the mains lead while
2
pressing down Z on the player.
Keep pressing down Z on the player
3
until the tray opens.
disc. When "OPEN" appears on the
5
front panel display, hold down [/1 on
the player for more than 10 seconds
until the player turns off.
"Exxxx" or "TEMP" appears on the
front panel display.
, When "Exxxx" appears, contact your
nearest Sony dealer or local authorised
Sony service facility and give the error
code.
, When "TEMP" appears, place the
player in a location with adequate
ventilation to prevent heat build-up in
the player. "TEMP" will appear for a
short time.
The player does not respond to any
button.
, Moisture has condensed inside the
player (page 3).
, Hold down [/1 on the player for more
than 10 seconds until the player turns
off.
If the player still does not respond to
any button, disconnect then reconnect
the mains lead.
Turn the player
1
Remove the
4

Specifications

System
Laser: Semiconductor laser
Inputs and outputs
(Jack name:
Jack type/Output level/Load
impedance)
DIGITAL OUT (COAXIAL):
Phono jack/0.5 Vp-p/75 ohms
HDMI OUT:
HDMI 19-pin standard connector
LAN (100):
100BASE-TX Terminal
USB:
USB jack Type A (For connecting a
USB memory, memory card reader,
digital still camera, and digital video
camera)
Wireless (BDP-S5100 only)
Wireless LAN standard:
IEEE 802.11 b/g/n
Frequency range:
2.4 GHz band: Channels 1-13
Modulation:
DSSS and OFDM
General
Power requirements:
220 V - 240 V AC, 50/60 Hz
Power consumption:
BDP-S4100: 13 W
BDP-S5100: 14 W
Dimensions (approx.):
360 mm × 199 mm × 43 mm
(width/depth/height)
incl. projecting parts
Mass (approx.): 1.3 kg
Operating temperature:
5 ºC to 35 ºC
Operating humidity:
25 % to 80 %
37