Output Check - Brother KE-430F Input Check

４-１. OUTPUT check
1. ▽ key (1) + Power ON
⇒ PROGRAM No. display (2) = check code
⇒ menu display (3) = abbreviated output name
2. Press the or
3. For check code 55 and after, depress the foot switch to the 2nd step.
4. When returning to normal operation, turn power off and then on again.
Check code Abbreviation
［ 51］
［PM－X］
［ 52］
［PM－y］
［ 53］
［PM－P］
［ 54］
［PM－n］
［ 55］
［CL－r］
［ 56］
［CL－L］
［ 57］
［Foot］
［ 58］
［FLiP］
［ 59］
［CooL］
［ 60］
［7SEG］
［ 61］ ［ CUt］
［ 62］
［dtEn］
［ 63］ ［ WiP］
key (5) to check the operations for check codes 51 - 54.
When you press the
When you press the
When you press the
When you press the
When you press the
When you press the
When you press the
position.
When you press the
position.
The valve for the right work clamp turns on (*)
The valve for the left work clamp turns on (*)
The valve for the stepping foot turns on (*)
The valve for the inner clamping device turns on. (*)
The valve for the needle cooler turns on. (*)
The LEDs on the panel illuminate in sequence, and then each of the seven
segments of the PROGRAM No. display and menu display illuminate.
The thread trimmer solenoid turns on.
The tension release solenoid turns on.
The external wiper solenoid turns on.(*)
Function
key, the work clamps move to the left.
key, the work clamps move to the right.
key, the work clamps move forward.
key, the work clamps move back.
key, the work clamps rise.
key, the work clamps drop.
key, the thread nipper moves toward the home
key, the thread nipper moves toward the retract
2619B