Oven Door Opening; 6- And 10-Rack Models; Oven Door Closing; Description Of Control Panel - Electrolux Air-O-Speed AOW101E Installation And Operation Instruction Manual

EN

1. OVEN DOOR OPENING

The oven is equipped with a safety system to prevent you being
exposed to steam when opening the door completely, therefore
carry out the following operations, according to the model:

1.1 6- AND 10-RACK MODELS

Caution! Risk of burns.
Always open the door with caution when the oven is hot.
a) Turn the oven door handle counter-clockwise as far as it will go.
The door opens slightly and is stopped by the door safety device.
If there is a cooking program in progress it will be interrupted but
will continue when door is closed.
b) Turn the door handle to the vertical position and then pull
outwards, the door will offer light resistance and then open
completely.

2. OVEN DOOR CLOSING

2.1 6- AND 10-RACK MODELS
a) Turn the door handle counter-clockwise as far as it will go and
press the door closed against the oven.
b) Keeping the door pressed closed, lock it by turning the handle
to the vertical position.

3. DESCRIPTION OF CONTROL PANEL

3.1 FOREWORD

For easy understanding of oven operation, when reading keep
the flap relating to the control panel of your model open, identify-
ing it from those given on the last pages of this manual.
All the functions available in the various models of the range are
described below.
Certain functions are shared by all models, whereas others
are available only on some versions.

3.2 BASIC CONTROLS

Main switch
Cooking cycle/program Start/stop.
GRAPHIC DISPLAY management
ing oven control mode.
GRAPHIC DISPLAY
Graphic display for showing all available oven functions.
P1-P2-P3-P4 Button for selecting the functions shown on the
GRAPHIC DISPLAY.
Press this button once to select the function shown above the
arrow.
K Knob for selecting and setting the values of each function.
20
controls : buttons for select-