Autocad R11 Setup - Asus SP97-XV User Manual

IX. SOFTWARE DRIVERS

5.1 AutoCAD R11 Setup

1. The following procedures assume that
(1) You have complete "unpack & copy" procedure.
(2) Your ADI 4.2 drivers are located in C:\ADI42.
2. Add the following setting to your own batch file for AutoCAD R11 (say
ACADR11.BAT) or to your "AUTOEXEC.BAT" file:
SET DSPADI=\ADI42\RCPSIS.EXP <Enter>
3. Delete the configure file ACAD.CFG resides in \ACAD directory.
4. Type ACADR11 <Enter> to configure your AutoCAD R11 system.
5. In "Select Display Device:" item, choose "ADI P386 V4.0/4.1 display"
6. In "Select Display Resolution" screen, choose which display driver you want to
use.
7. Go through the whole instrutions, and the system would start with the desired
display setting.
ASUS SP97-XV User's Manual 81