Lcd Screen - Sony Handycam HDR-PJ790V Operating Manual

On handling the LCD screen
If you leave fingerprints, hand cream, etc. on

the LCD screen, the coating of the LCD screen
will come off easily. Wipe those off as soon as
possible.
If you wipe the LCD screen strongly with a

tissue, etc., the coating of the LCD screen may
be scratched.
If the LCD screen becomes dirty with

fingerprints or dust, it is recommended that you
gently remove those from the screen then clean
it with a soft cloth, etc.

LCD screen

Do not apply excessive pressure on the LCD

screen, as it may cause uneven color and other
damage.
If your camcorder is used in a cold place, a

residual image may appear on the LCD screen.
This is not a malfunction.
While using your camcorder, the back of

the LCD screen may heat up. This is not a
malfunction.
To clean the casing and the projector
lens
Wipe the casing and the lens gently with a

soft cloth such as a cleaning cloth or eyeglass
cleaning cloth.
If the casing and the projector lens is very dirty,

clean the camcorder casing and the lens with
a soft cloth lightly moistened with water, and
then wipe the casing and the projector lens with
a dry soft cloth.
Avoid the following so as not to deform the

casing, damage the finish or scratch the lens:
Using chemicals such as thinner, benzine,

alcohol, chemical cloths, insect repellent,
insecticide and sunscreen
Handling the camcorder with the above

substances on your hands
Leaving the camcorder in contact with rubber

GB
or vinyl objects for a long period of time

On handling the light-emitting part
of flash
If the LCD screen becomes dirty with
fingerprints or dust, it is recommended that
you use a soft cloth to clean it.
About the Carl Zeiss lens
Your camcorder is equipped with a Carl
Zeiss lens, which was developed jointly
by Carl Zeiss, in Germany, and Sony
Corporation, and produces superior
images. It adopts the MTF measurement
system for video cameras and offers a
quality typical of a Carl Zeiss lens. Also,
the lens for your camcorder is T -coated
to suppress unwanted reflections and
faithfully reproduce colors.
MTF= Modulation Transfer Function. The
number value indicates the amount of light
from a subject coming into the lens.
About care and storage of the lens
Wipe the surface of the lens clean with a soft

cloth in the following instances:
When there are fingerprints on the lens

surface
In hot or humid locations

When the lens is exposed to salty air such as

at the seaside
Store in a well-ventilated location subject to

little dirt or dust.
To prevent mold, periodically clean and store

the lens as described above.