Table of Contents
Advertisement
Boot Manager
The Boot Manager allows users to select the boot device without accessing the BIOS utility.
NOTE:
Boot Manager is available only if the F12 Boot Menu parameter in Main menu is set to
Enabled (refer to
Perform the following to use the F12 Boot menu:
Start the computer.
1.
When prompted, press the F12 key during POST. The Boot Manager screen appears.
2.
↑
Use the
and
3.
Press Enter to select and continue with the boot procedure.
4.
System Utilities
Main
on page 2-5).
Boot Option Menu
1. Network Boot : BRCM MBA Slot 0200 v15.0.11
2. HDD : XXXXXX
3. ATAPI CDROM : XXXXXX
and to change option, ENTER to select an option
Figure 2:14. Boot Manager Screen
↓
keys to highlight a boot device.
Boot Manager
2-14
Advertisement
Table of Contents
