Mainboard Removal
Prerequisite
Locate the WLAN antenna cables.
1.
Disconnect the main (black) and the auxillary (white) antenna cable connectors and remove
2.
from the guides of the lower case.
Pull the auxillary (A) and the main (B) antenna cables to pass through the mainboard holes,
3.
detach the adhesive tapes (C), and then set the antenna cables aside.
C
A
B
3-46
Upper Case Removal
Figure 3:65. Removing the Antenna Cables (1 of 2)
Figure 3:66. Removing the Antenna Cables (2 of 2)
on page
3-36
Service and Maintenance