HP D7171A - NetServer - LPr Configuration Manual page 3

Storage
Local
Controller
Cabinets (Physical drive
location)
Disk drives (hot swap
or fixed)
SCSI bus
SCSI IDs
Shared
Host Bus Adapter:
Model
No. of HBA
Driver
SPU I/O slot
Disk Array Controller:
Model
No. of controllers
Microcode
Disk Array Storage:
Model
No. of cabinets
Controller
Disk capacities:
ArrayGUIde
RAID levels
Logical units
Hot spares
Power Supply
RAID arrays
Any number, manufacturer or driver in any available I/O slot. However,
for NetRAID local storage use PCI slot P8.
SPU internal drive bays or HP external drive cabinet (e.g., HP Rack
Storage/8), any number.
Must be HP.
Any HP cables that meet SCSI specifications and any SCSI bus speed.
Any
A5246A HP Fibre Channel Adapter Kit for NT
1 – 2. (See Shared Storage Configurations.)
2.09.B.038.020
st
P5 (1 HBA) and P6 (2
SP630/FC Storage Processor (ordered with A3661B or A3662B)
1 – 2. (See Shared Storage Configurations.)
9.45.03 or greater
A3661B HP High Availability Disk Array Model 30/FC.
See Shared Storage Configurations.
1 – 2. (See Shared Storage Configurations.)
4 GB, 8.8 GB, 17.8 GB
Version 1.7.0 or greater
1, 1/0, 3 and 5
Logical units within each array must be numbered from 0 – 7.
Recommend assigning logical unit numbers 8 or greater
3
Different size or speed disks are allowed in the same RAID array but
are not recommended in the same logical unit.
3
nd
HBA)