Canon PowerShot A400 Silver Software Starter Manual page 20

16
Downloading Images to the Computer
Perform the following settings the first time you connect the camera to the
computer.
These procedures are not required from the second time onward.
1. Select [Canon CameraWindow] when
a dialog (Events dialog) similar to that
on the right displays and click [OK].
Your camera model name or "Canon
Camera" will appear here.
If the Events dialog fails to display, click the [Start] menu and select
[Programs] or [All Programs], followed by [Canon Utilities],
[CameraWindow], and [CameraWindow Set Auto-Launch]. Proceed to
Step 2.
A dialog allowing you to select the camera model will display if a
camera and a memory card reader are connected at the same time.
Confirm that your model name or "Canon Camera" is displayed and
click [OK].
2. Click [Set].
You must repeat Steps 1 and 2 above
the next time you connect when you
select the Don't Set option.
2
Download the images.
Use the computer or camera to download
images described as follows.
The window may appear slightly different
with some camera models.
You can confirm information such as the
destination folder for images.