Tools Required; Rack Configuration Tools - HP D7171A - NetServer - LPr Instructions Manual

13 alternative rack mounting (4 - post)
Hide thumbs Also See for D7171A - NetServer - LPr:
Table of Contents

Advertisement

Chapter 13
Before mounting the Netserver, determine the Netserver's location in the rack
relative to other rack components. Proper placement is vital both for safety and
operating efficiency. For more information, refer to "Rack Configuration Tools"
later in this chapter.
NOTE
If the HP Netserver is completely configured by the vendor
before delivery to the customer, then mounting the HP
Netserver in the rack may be the final step in the installation
procedure. If the vendor configures the HP Netserver at the
customer's site, installation of the network operating system
and other software may occur after the HP Netserver is
mounted in the rack.
CAUTION
If other rack components are to be mounted in the rack below
the HP Netserver, install those components before starting to
mount the Netserver.

Tools Required

This rack mounting kit is provided as a tool-less assembly, but does need a nut
drive or wrench to release the spring mechanism after shipping.
Nut driver (10-mm) or wrench (removing spring assembly)
Phillips screwdriver (removing spring assembly)
Masking tape or marking pen

Rack Configuration Tools

The HP rack configuration tools, including white papers, are available on
worldwide web at HP's web site. Enter the following URL in your browser:
http://www.hp.com/netserver
At the Web site, search for "configuration tools" and "high density rack
solutions," specifically Rack Assistant, Rack Configuration, Order Assistant, and
HP Netserver High Density Rack Solutions Overview (LP 1000r and LP 2000r).
You can read about the tools or download copies for installation. These tools can
be used to plan a rack configuration for the components in your system.
The white papers, specifically HP Netserver High Density Rack Solutions
Overview (LP 1000r and LP 2000r), provide rack information for HP Netservers
2
Alternative Rack Mounting (4–Post)

Advertisement

Table of Contents
loading

Table of Contents