HP D7171A - NetServer - LPr User Manual page 9

Chapter 2
2. Disk spacers attach to the disk drive module with four small feet.
To remove a disk spacer from the adjacent disk drive module:
Slide the disk spacer back, a fraction of an inch (2.5 cm), away from
your body.
Tilt up the front of the disk spacer to disengage the front two feet.
Pull the disk spacer forward slightly, to disengage the back two feet and
lift.
Figure 2-2. Removing the Disk Spacer From a Disk Drive Module
To attach a disk spacer to a disk drive module:
Tilt up the front of the disk spacer and engage the back two feet.
Press the disk spacer back, a fraction of an inch (2.5 cm), away from
your body.
Lower the front of the disk spacer into place to engage the front two
feet.
Installation Procedure
5