Canon PowerShot A20 Software Starter Manual page 39

Software starter guide dc sd ver.4
Hide thumbs Also See for PowerShot A20:
Table of Contents

Advertisement

Precautions when Shooting with RemoteCapture
• If your computer is set to go into standby mode, there is no guarantee that
RemoteCapture will continue to function after the computer has entered standby
mode. Always turn off the standby function before you start shooting with
RemoteCapture.
• The camera's auto power save setting is disabled while connected to RemoteCapture,
and the power remains on until manually turned off. You are recommended to
power the camera with a household power source while it is connected.
• Please note that the camera will not be able to shoot at the specified interval if it is
shorter than the time required to send the image and save it on the computer.
• If the camera is set for "mirror lockup" shooting, the shutter will activate
approximately two seconds after the release button is clicked in RemoteCapture.
(Supported by the EOS D30 only)
Setting Basic Shooting Settings in RemoteCapture
The camera's shooting settings can be adjusted by clicking the [Shooting Settings] tab
in the RemoteCapture window.
Please adjust the shooting settings for the EOS D30 on the camera itself.
Test Preview
A preview of the test shot displays.
Sets the camera's zoom setting.
Test Shot
Takes a test shot.
Test shots are not saved to the computer.
Basic camera settings can be adjusted.
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents