Sound - Philips 50PFL3908/F7 User Manual

Sound

Before you begin:
You must set Home in Location. ➟ p.35
Otherwise, personalized Picture and Sound settings will not be
memorized after the unit goes into Standby mode.
1
Press (MENU) and use ▲▼◄► to select Setup then press
OK.
2
Use ▲▼ to select Sound, then press OK.
Settings assistant
Auto sound
Equalizer
Picture
Balance
Sound
Features Digital audio language
SRS TruSurround HD
Installation
Auto volume leveling
Software
TV speakers
Headphone volume
3
Use ▲▼◄► to select the item you want to adjust, then press OK.
The following sound settings can be configured. Depending on the
format of the broadcasting, some sound settings are not available.
to select the desired setting.
(Personal, Standard, Vivid, Sports, Movie, Music and
News)
Auto sound
When you adjust the following settings (Equalizer, SRS
TruSurround HD and Auto volume leveling), Personal
sound will be set automatically.
Adjust the tonal quality for each frequency.
Cursor ◄
Equalizer
to adjust each level of tonal quality
Press BACK to go back to the previous menu.
Adjust the speakers to suit your listening preference.
Cursor ◄
Balance
to adjust the balance of the right and left speakers
Personal
Start now
English
On
Off
On
Cursor ►
Cursor ►
Digital TV operation
You can select the Audio language while your TV is receiving the Digital
broadcasting.
Digital audio
to select the language according to your preference.
language (It differs depending on the program.)
Analog/Cable TV operation
You can select Main or SAP while your TV is receiving the Analog
broadcasting that has the SAP (Second Audio Program).
(It differs depending on the program.)
Main
Alternate audio
SAP
Analog/Cable TV operation
When you set to Main in Alternate audio above, you can select Mono
or Stereo if the Analog broadcasting is sending the MTS (Multichannel
television sound).
Mono
Mono/Stereo
Stereo
This selects sound modes for more spatial or surround sound
reproduction.
Off
SRS TruSurround
HD
On
This function keeps a constant loudness differential between the TV
commercials and the programs.
Off
Auto volume
leveling
On
You can select the Audio Output from the unit's speakers or not. If your
amplifier is HDMI link function compatible and connected by an HDMI
cable to this unit, some sound operations such as volume up can be
changed by using this unit's remote control. Make sure Master EasyLink
is set to On. ➟ p.36
Off
On
TV speakers
Speakers
EasyLink
Adjust headphone volume.
Cursor ◄
Headphone
volume
to decrease or increase volume
You can set the digital audio output format from SPDIF/ARC.
PCM
Digital output
format
Multichannel
If a channel or Input device is too loud or too soft, navigate to that
channel or Input device.
Cursor ◄
to set a negative delta
Delta volume
volume level as per your
personal preferences
Note
• Alternate audio and Mono/Stereo are not available when you watching TV programs
with a cable box or satellite set-top box connected through an HDMI cable or
Component / Composite Video cables.
to output main-audio
to output second-audio program
to output mono-audio
to output stereo-audio
to set SRS TruSurround HD™ to Off
to set SRS TruSurround HD™ to On
to remove the auto volume leveling
to reduce volume differences between
the TV commercials and the programs
not to output sound from the unit's
speakers
to output sound from the unit's speakers
to control Audio Output from your
connected EasyLink Compliant Devices
with VOL + / − by using this unit's
remote control.
Cursor ►
to output PCM signals.
to output multichannel signals.
(When the audio of the content is PCM,
it will be output in PCM even if
Multichannel is selected.)
Cursor ►
to set a positive delta
volume level as per your
personal preferences
29
English