Download Print this page

HP SN6000B Hardware Reference Manual: Environmental Requirements; General Specifications

16gb 48-port fibre channel switch.
Hide thumbs

Advertisement

Table 9 Power supply specifications (continued)
Specification
Single power supply output
Maximum current
Input line protection
System power consumption

Environmental requirements

Table 10 (page 40)
(such as during transportation or storage) conditions.
Table 10 Environmental requirements
Condition
Ambient
temperature
Humidity
Altitude
Shock
Vibration
Airflow
Heat dissipation
General specifications
Table 1 1 General specifications
Specification
Configurable port types
System architecture
System processor
ANSI FC protocol
Modes of operation
Fabric initialization
FC-IP
Aggregate switch I/O bandwidth
FC port-to-port latency
Aggregate switching capacity
40
Specifications
Values
the form of AC cycles, or multiple AC cycles greater than 10 ms and less
than 150 ms, must not exceed 15 A peak.
150 W at 12 VDC
12.5 A at 12 VDC
Both AC lines fused
1 10 W with all 48 ports populated with 16 Gb/s SWL optical media
72 W with empty chassis and no optical media
lists the acceptable environmental ranges for both operating and nonoperating
Acceptable range during operation
0º to 40ºC (32º to 104ºF)
10% to 85% RH non-condensing, at 40ºC (104ºF)
0 to 3 km (9,842 ft) above sea level
20 G, 6 ms, half-sine wave
0.5 G sine, 0.4 gms random, 5–500 Hz
Maximum - 71.36 cubic m/h (42 cubic ft/m)
Nominal - 59.47 cubic m/h (35 cubic f/m)
338 BTU/hr (32-port configuration)
375 BTU/hr (48-port configuration)
Description
F_Port, E_Port, M_Port, EX_Port, and D_Port
Nonblocking shared-memory switch
PowerPC 440EPx at 667 MHz
FC-PH
FC Class 2 and Class 3
Complies with FC-SW-3 Rev. 6.6
Complies with FC-IP 2.3 of FCA profile
768 Gb/s
Less than 700 ns with no contention (destination port is free)
420 million frames per second (for Class 2, Class 3, and Class F frames for
the 48 port chassis)
Acceptable range during nonoperation
-25º to 70ºC (- 1 3º to 158ºF)
10% to 90% RH non-condensing, at 70ºC (158ºF)
0 to 12 km (39,370 ft) above sea level
33 G, 1 1 ms, half-sine wave, 3/e.g. Axis
2.0 G sine, 1.1 gms random, 5–500 Hz
N/A
N/A

Advertisement

   Also See for HP SN6000B

   Related Manuals for HP SN6000B

Comments to this Manuals

Symbols: 0
Latest comments: