Download Print this page

HP SN6000B Hardware Reference Manual: A Specifications; Physical Specifications; Facility Requirements; Power Supply Specifications

16gb 48-port fibre channel switch.
Hide thumbs


A Specifications

This appendix provides switch specifications.
Physical specifications
Table 7 Physical specifications
Depth (without plenum)
Width (The slightly increased width requires a slim rail
rack mount kit for mounting.)
Weight (with two power supply and fan assemblies, and
no SFPs installed)
Facility requirements
Table 8 Facility requirements
Cabinet (rack mounted)
Use rack kits designed for the extra
width of the switch to mount in
standard cabinets/racks.
Power supply specifications
The power supplies are universal and operate worldwide without voltage jumpers or switches.
They meet IEC 61000-4-5 surge voltage requirements and support autoranging to accommodate
input voltages and line frequencies. Each power supply has built-in fans for cooling.
Table 9 Power supply specifications
Input voltage
Input frequency
Inrush current
1U or 4.3 cm (1.7 in)
44.3 cm (17.4 in)
43.8 cm (17.2 in)
9.2 kg (20.2 lb)
Adequate supply circuit, line fusing, and wire size, as specified by the electrical
rating on the switch nameplate
Circuit protected by a circuit breaker and grounded in accordance with local
electrical codes
Table 9 (page 39)
for complete power supply specifications.
Minimum airflow of 79.8 cubic m/hr (47 cubic ft/min) available in the
immediate vicinity of the switch
Ambient air temperature not exceeding 40°C (104°F) while the switch is
1U in a 48.3 cm (19 in) cabinet
All equipment in cabinet grounded through a reliable branch circuit connection
Plenum installed to prevent overheating
Additional weight of switch not to exceed the cabinet's weight limits
Cabinet secured to ensure stability in case of unexpected movement
Range: 85–264 VAC Auto-volt, Nominal: 100–240 VAC, 2.0 A, 47–63
Hz; switch autosenses input voltage
Range: 47–63 Hz; Nominal: 50–60 Hz
Maximum of 50 A peak at 240 VAC for any initial current surge or spike of
10 ms or less at cold start up. Additional inrush current surges or spikes in
Physical specifications


   Also See for HP SN6000B

   Related Manuals for HP SN6000B

Comments to this Manuals

Symbols: 0
Latest comments: