Deleting The Encryption Key - HP StorageWorks P9000 User Manual

8. Click Open to close the window.
The name of the selected file appears in File Name in the Restore Keys window.
9. Type the password for the encryption key in Password. This is the password that was entered
when the selected key was backed up.
10. Click Finish to display the Confirm window.
1 1. Confirm the settings and enter the task name in the Task Name box.
12. Click Apply in the Confirm window.
The task is registered. If the Go to tasks window for status check box is on, the Tasks window
appears.

Deleting the encryption key

To delete the encryption key
1. Click Encryption Keys in the Administration tree.
2. Select the Encryption Keys tab on the right side of the window.
3. Select a encryption Key.
The uncreated encryption key, or the encryption key allocated to the parity group cannot be
deleted.
4. On the menu bar, click Settings, Security, Encryption Keys, and then Delete Keys. Or, select
Delete Keys from the lower right of the window. The Delete Keys window opens.
5. Confirm the settings and enter the task name in the Task Name box.
6. Click Apply in the Confirm window. A message appears asking whether to apply the setting
to the storage system.
7. Click OK.
The task is registered. If the Go to tasks window for status check box in the Confirm window
is on, the Tasks window appears.
Deleting the encryption key 13