Part Code 03121 - HP StorageWorks P9000 Manual

Table 33 Error codes (part code 03022) (continued)
Part Error
Code Number
03022 105249
03022 105250
03022 105259
03022 105263
03022 105267
03022 105270
03022 105271
03022 105272
03022 105273
03022 105274
03022 105275
03022 105279
03022 105280
03022 105281
03022 105312
03022 105313
03022 105314

Part code 03121

Table 34 Error codes (part code 03121)
Part Error
Code Number
03121 109205
Error Message
Insufficient free space to create LDEV.
Two or more Basic exists together to
External.
There is no output file.
An LDEV that Snapshot is set has been
selected.
Volumes that can be shredded in the
selected volumes will be displayed.
The selected status will be canceled
because the number of free spaces that
exist in the selected parity group exceeds
the number that can be set.
The number of free spaces that exist in
the selected parity group exceeds the
number of volumes that can be set.
Data Output cannot be set more than 3.
The interruption process cannot be done
because there is an unexecuted specified
task.
The interruption processing was
completed.
The current setting exceeds the maximum
number of quick formatting that can be
executed.
This functionality is not available. Virtual
LVI is required.
This functionality is not available. Open
Volume Management is required.
There is no LDEV that can be formatted.
Various system types are mixed in the
selected pools.
An LDEV cannot be created because the
free space that is available to set has
already been registered in the task.
In the selected parity group, there is an
area where LDEV cannot be made by
default.
Error Message
Are you sure you want to initialize all
the THP pools?
Recommended Action
Check the setting(s).
Check the setting(s).
Please operate it again after executing
Shredding.
Check the setting(s).
Click [OK] to shred.
Select the free spaces again from the
Select Free Space window.
Select the free spaces again from the
Select Free Space window.
Check the setting(s).
Wait for a while, then retry the
operation.
The task status is changed. Close the
window, then check the task status.
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Wait until the task is complete, and then
retry the operation.
Select the emulation type or the free
space again, and then create an LDEV.
Recommended Action
To continue the processing, click [OK].
Otherwise, click [Cancel].
Severity
Level
W
E
E
i
i
W
W
W
i
i
i
W
W
E
W
W
W
Severity
Level
W
Part code 03121 95