HP StorageWorks P9000 Manual page 86

Table 31 Error codes (part code 3005) (continued)
Part Error
Code Number
3005 68797
3005 68798
3005 68799
3005 68802
3005 68818
3005 68819
3005 68820
86 Message (part code group 3nnn)
Error Message
Failed to restore the pool. Pool cannot
be restored when it is in following
status:
It is taking time for processing
because some blocked parts exist in
the storage system.
The pool volume is blocked.
Failed to delete the pool.
Pool cannot be deleted when:
The V-VOL management area is not
initialized.
The V-VOL management area is not
installed.
A Snapshot pair still remains in the
pool.
A P-VOL still remains in the pool.
A Pool-VOL in the pool is blocked.
The process to delete a Thin
Provisioning volume is being
executed.
Failed to change the threshold of the
pool. The threshold of the pool cannot
be changed when:
The threshold is set below the usage
rate of the pool.
The pool is shrinking.
The Pool-VOL in the pool is blocked.
The specified volume includes a system
disk being used by the audit log.
The pool is blocked.
The specified volume cannot be
processed because it is blocked.
The specified volume cannot be
processed, because it is not associated
with a pool.
Recommended Action
When the pool cannot be restored, wait
for a while, click [Refresh] or [Refresh
All] on the [File] menu of the Remote
Web Console window, then check the
pool status in the pool window.
If this problem persists, refer to the
troubleshooting section in the HP
StorageWorks P9000 Provisioning for
Open Systems User Guide.
When the pool cannot be deleted, do
the following:
Check the installation status of the
V-VOL management area, when the
V-VOL management area is not
initialized.
Check the installation status of the
V-VOL management area, when the
V-VOL management area is not
installed.
Delete the Snapshot pair if it still
remains in the pool.
Delete the Snapshot pair if P-VOL still
remains in the pool.
Restore the status of Pool-VOLs in the
pool when the pool is blocked, then
retry the operation.
Update the display content and
confirm that the usage rate of the pool
is zero, then retry the operation.
When the pool threshold cannot be
changed, do the following:
Update the display content and
confirm the usage rate of the pool.
Wait for shrinking the pool to end if
it is shrinking. Then retry the
operation.
Check the status of the Pool-VOL in
the pool and restore it if it is blocked.
Then retry the operation.
Set the Audit Log buffer function to
"Disable," then retry the operation.
Recover the pool, then retry the
operation.
Recover the volume, then retry the
operation.
Associate the volume with a pool, then
retry the operation.
If this problem persists, please contact
HP Technical Support.
Severity
Level
W
W
W
W
W
W
E