HP StorageWorks P9000 Manual page 85

Table 31 Error codes (part code 3005) (continued)
Part Error Error Message
Code Number
3005 65695 An error occurred during SVP
processing.
3005 65717 The specified volumes contain volumes
that cannot be formatted.
3005 65740 The configuration changing processes
are conflicting at DKC.
3005 65767 The specified volume contains a quorum
disk.
3005 65790 The specified volume includes a remote
command device being used by a
mirror of the journal group.
3005 68722 The specified volume is not a Thin
Provisioning volume.
3005 68723 An internal logic contradiction occurred
on the DKC side.
3005 68724 Shared memory is not installed.
3005 68725 The shared memory for the V-VOL
management area is insufficient.
3005 68726 The capacity of Thin Provisioning
volume (V-VOL) is insufficient.
3005 68727 Shared memory is being initialized.
3005 68728 The pool is in an abnormal state.
3005 68729 LDEV format is being executed in the
specified volume.
3005 68736 An error occurred during SVP
processing.
3005 68748 The number of Thin Provisioning
volumes that can be associated with a
single pool has exceeded the
maximum.
3005 68751 The disk storage system is executing the
processing to release the association,
inside.
3005 68761 An error occurred on the DKC side.
3005 68785 The specified parity group is not
mounted.
3005 68786 The specified parity group is not
blocked.
Recommended Action
If this problem persists, please contact
HP Technical Support.
Select only the volumes that can be
formatted and format the volumes.
Check if the configuration changing
process by RAID Manager, Auto LUN,
or Quick Restore is not in the operation,
then retry the operation.
Check the specified volume.
Check the specified volume.
Check the setting of the specified volume.
Please contact HP Technical Support.
Install the shared memory.
Delete the unnecessary Thin Provisioning
Pool (THP Pool) and Thin Provisioning
volume (V-VOL), then retry the operation.
If this problem persists, please contact
HP Technical Support.
Check volume capacity for the V-VOL.
Wait a while, then retry the operation.
Recover the pool, then retry the
operation.
Retry the operation after the formatting
operation has completed.
If this problem persists, please contact
HP Technical Support.
Check the current configuration of
association.
Wait for a while, then retry the
operation.
If this problem persists, please contact
HP Technical Support.
Check the specified parity group.
Check the status of the specified parity
group.
Severity
Level
E
W
W
W
W
W
E
W
W
W
W
W
W
E
W
W
E
W
W
Part code 3005 85