HP StorageWorks P9000 Manual page 49

Table 21 Error codes (part code 0605) (continued)
Part Error Error Message
Code Number
0605 68802 The volume to be maintained includes
the system disk being used at Audit Log.
0605 68871 The specified volumes include remote
command devices being used with
mirrors in the Journal of the Continuous
Access Journal or the Continuous Access
Journal Z.
0605 68884 Quorum disks are included in the items
to be maintained.
0605 68901 An external volume was not able to be
recovered.
0605 68902 The external volume was able to be
restored, but some of mapping paths
were not able to be restored normally.
0605 68903 Failed to disconnect from the external
volume.
0605 78031 The specified Processor Blade is blocked.
0605 78032 The specified Processor Blade is not
mounted.
0605 78047 A sufficient Cache Control Device cannot
be allocated to the target volume.
0605 78048 Failed to get the user information.
0605 78049 You do not have a permission to treat
the ports where the specified external
volumes are derived from.
0605 78050 You do not have a permission to treat
the ports where the specified external
paths are derived from.
0605 78051 You do not have a permission to treat
the ports where the paths composing the
specified external path groups are
derived from.
0605 78052 You do not have a permission to treat
the ports where the specified WWNs
are derived from.
0605 78053 You do not have a permission to treat
the specified external volumes.
0605 78054 You do not have a permission to treat
the external volumes using the specified
external paths.
Recommended Action
Set the Audit Log buffer function to
"Disable," then retry the operation.
Release the allocation of mirrors in the
Journal for the remote command device,
then retry the operation.
Release the quorum disks, then retry the
operation.
Check the status of the mapping path
and resolve the root cause of blockade,
then retry the operation.
Check the status of the mapping path
and resolve the root cause of blockade
if needed, then retry the operation.
Check the states of the external volume
and the mapping path, and do not retry
the operation until the states return to
normal.
If the states cannot be restored to normal,
or if the problem persists despite retrying,
please contact HP Technical Support.
Recover the blocked Processor Blade,
then specify it.
Check the specified Processor Blade.
Delete unnecessary volumes, then retry
the operation. If this problem persists,
please contact HP Technical Support.
If the problem persists despite retrying,
please contact HP Technical Support.
Verify the available ports.
Verify the available ports.
Verify the available ports.
Verify the available ports.
Verify the available parity groups.
Verify the available parity groups.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
Part code 0605 49