HP StorageWorks P9000 Manual page 39

Table 18 Error codes (part code 0405) (continued)
Part Error Error Message
Code Number
0405 7205 An error occurred during SVP
processing.
0405 7206 An error occurred during SVP
processing.
0405 7207 An error occurred during SVP
processing.
0405 8002 An error occurred during SVP
processing.
0405 8003 The subsystem status is invalid.
0405 8202 The DKCMAIN microcode does not
support this program product.
0405 8203 This program product needs a later
version of hardware. Please contact HP
Technical Support.
0405 8204 To use this program product, it is
required to enable the program product
by allocating additional shared memory.
Add cache memory in case of need.
0405 8205 This program product remains in the
configuration. Please contact HP
Technical Support.
0405 8206 This program product is in use, you
cannot remove this program.
0405 8301 The subsystem status is invalid.
0405 55263 The specified program product cannot
be removed, because the license for it is
allocated to the SLPR.
0405 55506 Since the licensed capacity of SLPR0 is
insufficient, the partition capacity can't
be increased.
Recommended Action
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Isolate the abnormal section following
the procedure below:
Rebooting the PC
Checking the LAN card/LAN cable
Checking the IP address of the PC
Replacing the PC
Turning on, then off the DKC (care
should be taken.)
Isolate the abnormal section following
the procedure below:
Rebooting the PC. If this does not fix the
problem:
Checking the LAN card/LAN cable. If
this does not fix the problem:
Checking the IP address of the PC. If this
does not fix the problem:
Replacing the PC. If a new PC does not
fix the problem:
Turn the DKC on, then off (care should
be taken.
Contact the Support Center for the plans
of the program product to be supported
by DKCMAIN.
Please contact HP Technical Support.
Allocate additional shared memory, and
enable the program product.
Please contact HP Technical Support.
Stop using this program product function.
Retry this operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Severity
Level
E
E
E
E
E
E
E
E
E
W
E
E
E
Part code 0405 39