HP StorageWorks P9000 Manual page 245

Table 59 Error codes (part code 7005) (continued)
Part Error Error Message
Code Number
7005 58482 The operation cannot be performed,
because the specified reserved volume
is a P-VOL for Snapshot.
7005 58483 The operation cannot be performed,
because the specified reserved volume
is a V-VOL for Snapshot.
7005 58484 The operation cannot be performed,
because the specified reserved volume
is a pool volume.
7005 58492 The Pairsplit-S operation has failed.
Check the configuration.
7005 58493 The PCB required for this operation is
not mounted. Check the subsystem
configuration.
7005 58520 The operation failed, because different
versions of microcodes coexisted in the
disk subsystem.
7005 58533 The operation failed, because the
specified P-VOL was a journal volume.
7005 58534 The operation failed, because the
specified S-VOL was a journal volume.
7005 58535 The reserve volume setting failed
because the specified volume was a
journal volume.
7005 58536 The operation failed because the
specified S-VOL was a data volume of
Continuous Access Journal. Check the
requirements for using the volume with
Continuous Access Journal.
7005 58572 An error occurred on the DKC side. If
this problem persists, please contact HP
Technical Support.
7005 58573 This function is not supported.
7005 58574 An error occurred while connecting to
the subsystem.
7005 58575 An error occurred while connecting to
the subsystem.
7005 58576 A communication time-out error occurred
on the storage system.
7005 58579 The operation failed, because the
specified volume is being shredded by
Data Retention. Retry the operation after
the shredding is completed.
Recommended Action
Release the Snapshot pair, or select
another volume.
Specify another volume.
Release the pool volume, or select
another volume.
Refresh the window, and check whether
the pair exists.
Mount the required PCB, then retry the
operation.
Replace the microcode, then retry the
operation.
Release the journal volume setting, or
specify another volume.
Release the journal volume setting, or
specify another volume.
Release the journal volume setting, or
specify another volume.
Check the requirements for using the
volume with Continuous Access Journal.
An error occurred on the DKC side. If
this problem persists, please contact HP
Technical Support.
Check if the DKCMAIN and SVP
microcode versions are mismatched.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Confirm that the shredding has
completed in the Data Retention window,
then retry the operation.
Severity
Level
W
W
W
W
E
E
W
W
W
W
E
E
E
E
E
W
Part code 7005 245