HP StorageWorks P9000 Manual page 120

Table 46 Error codes (part code 5205) (continued)
Part Error
Code Number
5205 1084
5205 1085
5205 1086
5205 1087
5205 1088
5205 1094
5205 1095
5205 1096
5205 1 109
5205 1 1 17
5205 1 1 18
5205 1 1 19
5205 1 120
5205 1 121
5205 1 122
5205 1207
120 Message (part code group 5nnn)
Error Message
The number of reserved volume that can
be set in the storage system exceeds the
maximum. The configuration information
on such as a volume (LDEV) displayed
on the window might be out of date.
The volume(s) are already used by Auto
LUN.
The RAID level of the target volume is not
supported.
The volume specified as a migration
target is being formatted.
The volume specified as a migration
source cannot be migrated, because it
is already used as a reserved volume of
Business Copy Z, Business Copy, or Auto
LUN.
The specified volume is not a reserved
volume. The configuration information
on such as a volume (LDEV) displayed
on the window might be out of date.
The number of the reserved volumes
exceeds the maximum number that can
be assigned.
The command has been rejected,
because the volume specified as a target
volume or a reserved volume is used by
the host.
Auto LUN does not support the volume(s).
The volume specified as a migration
source is already used as a volume of
Concurrent Copy.
The volume specified as a migration
target is already used as a volume of
Concurrent Copy.
The volume(s) is already being used by
Concurrent Copy.
The volume specified as a migration
source is already used as a volume of
Compatible XRC.
The volume specified as a migration
target is already used as a volume of
Compatible XRC.
The volume(s) is already being used by
Compatible XRC.
The volume types do not match.
Recommended Action
Click [Refresh All] on the [File] menu,
then retry the operation. If the same
problem persists despite retrying, please
contact HP Technical Support.
Retry the same operation. If nothing
changes, please contact HP Technical
Support.
Check the micro program version, and
please contact HP Technical Support.
Retry the operation after the format is
completed.
Specify another volume.
Click [Refresh All] on the [File] menu,
then retry the operation. If the same
problem persists despite retrying, please
contact HP Technical Support.
Retry the same operation. If nothing
changes, please contact HP Technical
Support.
Execute the vary offline command to
disable the volume from the mainframe
host, then retry the operation.
Retry the same operation. If nothing
changes, please contact HP Technical
Support.
Specify another volume.
Specify another volume.
Specify another volume.
Specify another volume.
Specify another volume.
Specify another volume.
Retry the same operation. If nothing
changes, please contact HP Technical
Support.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W