HP StorageWorks P9000 Manual page 101

Table 36 Error codes (part code 3205) (continued)
Part Error Error Message
Code Number
3205 6534 The number of V-VOLs that can be
registered in the storage system has
reached the maximum.
3205 6535 The configuration cannot be changed
because the LUN Path is remained in the
target volume.
3205 6536 The target volume cannot be changed
due to its LUSE configuration.
3205 6537 The setting process has not been
executed because there is no error in this
setting, but an error in the others settings.
3205 8000 An error occurred during SVP
processing.
3205 8001 An error occurred during SVP
processing.
3205 8102 This function is not supported.
3205 8140 The configuration of Compatible
FlashCopy is defined.
3205 8958 An error occurred on the DKC side.
3205 8966 An error occurred on the DKC side.
3205 56513 An emulation type that cannot be added
is specified.
3205 56516 The configuration of Continuous Access
Synchronous or Continuous Access
Synchronous Z is defined.
3205 56517 The configuration of Business Copy,
Business Copy Z, or Snapshot is defined.
3205 56519 The reserve volume setting for Business
Copy or Business Copy Z is defined.
3205 56520 The reserved volume setting for Auto LUN
is defined.
3205 58406 The configuration of Continuous Access
Journal or Continuous Access Journal Z
is defined.
3205 58407 The reserved volume setting for
Continuous Access Journal or Continuous
Access Journal Z is defined.
Recommended Action
Reduce the number of V-VOLs registered
in the storage system, then retry the
configuration operation.
Release the LUN Path, then change the
configuration again.
Release the LUSE volume, then change
the configuration again.
Check the error factor in the others
settings.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Check whether the DKCMAIN
microprogram version and the SVP
microprogram version are mismatched.
Release the configuration definition of
Compatible FlashCopy, then retry the
operation.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Check the emulation type. If you want to
change the cache segment size to set the
specified emulation type, please contact
HP Technical Support.
Release the configuration definition for
Continuous Access Synchronous or
Continuous Access Synchronous Z, then
retry the operation.
Release the configuration definition for
Business Copy, Business Copy Z, or
Snapshot, then retry the operation.
Release the reserved volume setting for
Business Copy or Business Copy Z, then
retry the operation.
Release the reserved volume setting for
Auto LUN, then retry the operation.
Release the configuration definition of
Continuous Access Journal or Continuous
Access Journal Z, then retry the
operation.
Release the journal volume setting of
Continuous Access Journal or Continuous
Access Journal Z, then retry the
operation.
Severity
Level
W
W
W
W
E
E
W
W
E
E
W
W
W
W
W
W
W
Part code 3205 101