HP P9000 Manual

Hp storageworks p9000 remote web console messages (av400-96375, may 2011).
Hide thumbs
Also See for P9000
Reference manual - 399 pages
User manual - 322 pages
Manual - 316 pages
HP StorageWorks
P9000 Remote Web Console Messages
Abstract
This document lists the error codes and error messages for HP StorageWorks P9000 Remote Web Console for P9000 disk
arrays, and provides recommended action for the error conditions.
HP Part Number: AV400-96375
Published: May 201 1
Edition: Fourth

Advertising

   Related Manuals for HP P9000

   Summary of Contents for HP P9000

  • Page 1

    HP StorageWorks P9000 Remote Web Console Messages Abstract This document lists the error codes and error messages for HP StorageWorks P9000 Remote Web Console for P9000 disk arrays, and provides recommended action for the error conditions. HP Part Number: AV400-96375...

  • Page 2

    © Copyright 2010, 201 1 Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.21 1 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license.

  • Page 3: Table Of Contents

    Contents 1 P9500 messages and error codes..............6 P9500 messages........................6 Message window format......................6 Advanced message window......................7 Remote Console-Remote Web Console error codes...............9 2 Message (part code group 0nnn)...............10 Part code 0001........................10 Part code 0002........................15 Part code 0003........................17 Part code 0004........................19 Part code 0005........................20 Part code 0006........................20 Part code 0007........................21 Part code 0010........................22...

  • Page 4: Table Of Contents

    Part code 3205........................100 Part code 03222........................103 Part code 3305........................104 6 Message (part code group 4nnn).............110 Part code 4005........................110 Part code 4010........................113 7 Message (part code group 5nnn).............114 Part code 5105........................114 Part code 5107........................116 Part code 51 10........................116 Part code 05121........................116 Part code 05122........................117 Part code 5205........................119 Part code 5210........................133...

  • Page 5: Table Of Contents

    1 1 Message (part code group 9nnn)............293 Part code 9005........................293 Part code 9007........................294 Part code 9010........................295 Part code 9105........................295 Part code 9107........................297 Part code 91 10........................297 Part code 9205........................299 Part code 9210........................302 Part code 9605........................302 Part code 9610........................305 12 Message (part code group 10nnn)............306 Part code 10010........................306 Part code 10121........................306 Part code 10122........................307...

  • Page 6: P9500 Messages And Error Codes, P9500 Messages, Message Window Format

    1 P9500 messages and error codes Unless otherwise specified, the term P9000 in this guide refers to the following disk array: P9500 Disk Array The GUI illustrations in this guide were created using a Windows computer with the Internet Explorer browser.

  • Page 7: Advanced Message Window

    Access Synchronous Z messages only. If you are a Continuous Access Synchronous user, note the following: The word M-VOL in Continuous Access Synchronous Z messages is equivalent to P-VOL in Continuous Access Synchronous messages. The word R-VOL in Continuous Access Synchronous Z messages is equivalent to S-VOL in Continuous Access Synchronous messages.

  • Page 8

    The advanced message window is also referable from the task window. (For details about the task window, see the HP StorageWorks P9000 Remote Web Console User Guide.) However, each detailed result might not be displayed at the volume creating operation or the LUN operation because they have a case that must process all at once.

  • Page 9: Remote Console-remote Web Console Error Codes

    Remote Console-Remote Web Console error codes To find solutions to the Remote Web Console for P9500 errors, see “Error codes (part code 0001)” (page 10) and subsequent tables of this manual or the Troubleshooting chapter in the user guides for the program products causing the errors. “Error codes (part code 0001)”...

  • Page 10: Message (part Code Group 0nnn), Part Code 0001

    2 Message (part code group 0nnn) This chapter includes the error messages with the part code 0001 to 0810. Part code 0001 Table 1 Error codes (part code 0001) Part Error Error Message Recommended Action Severity Code Number Level 0001 1000 An error occurred during SVP If this problem persists, please contact...

  • Page 11

    Table 1 Error codes (part code 0001) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0001 4007 An error occurred. If this problem Please contact HP Technical Support. persists, please contact HP Technical Support. 0001 4008 An error occurred. If this problem Please contact HP Technical Support.

  • Page 12

    Table 1 Error codes (part code 0001) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0001 5400 Since the SVP is busy, the monitoring Wait a while, then retry. data cannot be obtained. Do either of the following if two users are displaying the Performance Monitor window or running the Export Tool: Ask one of the users to display...

  • Page 13

    Table 1 Error codes (part code 0001) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0001 5637 An error occurred during SVP If this problem persists, please contact processing. If this problem persists, HP Technical Support. please contact HP Technical Support. 0001 5638 An error occurred during SVP...

  • Page 14

    Table 1 Error codes (part code 0001) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0001 7050 An error occurred during processing. The Remote Web Console version may The version of Remote Web Console may not match the version of the destination not match the version of destination SVP.

  • Page 15: Part Code 0002

    Table 1 Error codes (part code 0001) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0001 56556 Complete operation of SIMs failed Transfer the audit logs that have not been because the number of audit logs that transferred by FTP or download had not been transferred exceeded the operation, then retry the operation.

  • Page 16

    Table 2 Error codes (part code 0002) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0002 2009 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 0002 2010 An error occurred during SVP If this problem persists, please contact processing.

  • Page 17: Part Code 0003

    Table 2 Error codes (part code 0002) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0002 6051 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 0002 6502 Processing is in progress. Wait, then retry the operation.

  • Page 18

    Table 3 Error codes (part code 0003) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0003 2002 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 0003 2003 Such as Auto LUN and QuickRestore are Wait a while, then click [Refresh].

  • Page 19: Part Code 0004

    Table 3 Error codes (part code 0003) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0003 2084 The subsystem status is invalid. Check the DKC status and the current status of the configuration setting. If necessary, re-execute the setting operation.

  • Page 20: Part Code 0005, Part Code 0006

    Table 4 Error codes (part code 0004) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0004 6010 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 0004 601 1 An error occurred during SVP If this problem persists, please contact processing.

  • Page 21: Part Code 0007

    Part code 0007 Table 7 Error codes (part code 0007) Part Error Error Message Recommended Action Severity Code Number Level 0007 6012 An error occurred during SVP If this problem persists, please contact processing. If this problem persists, HP Technical Support. please contact HP Technical Support.

  • Page 22: Part Code 0010

    Part code 0010 Table 8 Error codes (part code 0010) Part Error Error Message Recommended Action Severity Code Number Level 0010 6023 An error occurred during the process. If Please contact HP Technical Support. this problem persists, please contact HP Technical Support.

  • Page 23: Part Code 00021, Part Code 00022

    Table 8 Error codes (part code 0010) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0010 56500 An error occurred while writing to a file. Check the status of the file. Alternatively, check the status of the drive where the file will be saved, and also check the free space on the drive.

  • Page 24

    Part code 01 10 Table 1 1 Error codes (part code 01 10) Part Error Error Message Recommended Action Severity Code Number Level 01 10 5030 The displayed information has not been Specify the data to be registered in the changed.

  • Page 25: Part Code 0190

    Table 1 1 Error codes (part code 01 10) (continued) Part Error Error Message Recommended Action Severity Code Number Level 01 10 5701 1 An error occurred regarding screen Log off from Remote Web Console. Then, display. Please log off from Remote Web log on to Remote Web Console again Console.

  • Page 26: Part Code 00122, Part Code 00222

    Part code 00122 Table 13 Error codes (part code 00122) Part Error Error Message Recommended Action Severity Code Number Level 00122 105260 The free space for storing audit log files Download the Audit Log. is running out. Usage Rate {0}% 00122 105261 The free space for storing audit log files...

  • Page 27

    Table 14 Error codes (part code 00222) (continued) Part Error Error Message Recommended Action Severity Code Number Level 00222 105220 The re-entered new password does not Check the setting(s). match the new password entered previously. 00222 105221 No check box is selected. Check the setting(s).

  • Page 28

    Table 14 Error codes (part code 00222) (continued) Part Error Error Message Recommended Action Severity Code Number Level 00222 106054 You cannot delete your own account. Retry the operation using another user account. 00222 106055 Failed to delete the user account. Check the following contents: If the specified user exists.

  • Page 29

    Table 14 Error codes (part code 00222) (continued) Part Error Error Message Recommended Action Severity Code Number Level 00222 106067 "All Resource Groups Assigned" Click [OK]. becomes enabled. 00222 106068 You cannot remove the selected users, Select some users as "Administrator User because "Administrator User Group"...

  • Page 30: Part Code 0290

    Part code 0290 Table 15 Error codes (part code 0290) Part Error Error Message Recommended Action Severity Code Number Level 0290 5020 The password is invalid. Input the correct password. 0290 5021 The password is invalid. Input the correct password. 0290 5080 The password is invalid.

  • Page 31

    Table 15 Error codes (part code 0290) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0290 6130 Failed to open the user account list file. Please contact HP Technical Support. 0290 6140 Failed to open the user account list file. If the same error occurs again despite retrying, please contact HP Technical Support.

  • Page 32

    Table 15 Error codes (part code 0290) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0290 6500 Failed to Backup. If the same error occurs again despite retrying, please contact HP Technical Support. 0290 9005 Are you sure you want to restore these Reply to this message.

  • Page 33: Part Code 0305

    Table 15 Error codes (part code 0290) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0290 56541 Failed to extract files. If this problem persists, please contact HP Technical Support. 0290 5661 1 Failed to create the file. If this problem persists, please contact HP Technical Support.

  • Page 34

    Table 16 Error codes (part code 0305) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0305 6022 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 0305 6023 An error occurred during SVP If this problem persists, please contact processing.

  • Page 35: Part Code 0310, Part Code 0405

    Part code 0310 Table 17 Error codes (part code 0310) Part Error Error Message Recommended Action Severity Code Number Level 0310 5010 Specify 0 or above but below 256 in Correct the specified content, and retry. each field. 0310 501 1 0 cannot be specified in all the fields or Correct the specified content, and retry the Class A field.

  • Page 36

    Table 18 Error codes (part code 0405) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0405 5070 The product name is different. Select the Check the product name of the selected correct program product name. program product. 0405 5071 Unable to install the license key.

  • Page 37

    Table 18 Error codes (part code 0405) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0405 5077 To remove this program product, you To remove this program product, you must remove another program product must remove another program product first.

  • Page 38

    Table 18 Error codes (part code 0405) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0405 5080 You cannot change this program Please contact HP Technical Support. product. 0405 5501 The trial days have exceeded the Please confirm the installation status of specified extended days.

  • Page 39

    Table 18 Error codes (part code 0405) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0405 7205 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 0405 7206 An error occurred during SVP If this problem persists, please contact processing.

  • Page 40: Part Code 0407

    Table 18 Error codes (part code 0405) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0405 55520 It is not possible to install it because of If this problem persists, please contact PP of pre-install. HP Technical Support. 0405 56524 This function cannot be used by the...

  • Page 41: Part Code 0410

    Part code 0410 Table 20 Error codes (part code 0410) Part Error Error Message Recommended Action Severity Code Number Level 0410 5030 The displayed information has not been Specify what you register, and retry. changed. Try again. 0410 55000 Since the error occurred in the install or Acquire the information again, and retry Remove judging, the apply operation the operation.

  • Page 42: Part Code 0605

    Part code 0605 Table 21 Error codes (part code 0605) Part Error Error Message Recommended Action Severity Code Number Level 0605 201 1 The status of the storage system requires Check the status of the storage system (if the maintenance (for example, the the storage system is blocked, shared storage system is blocked, the shared memory is inconsistent, or some other...

  • Page 43

    Table 21 Error codes (part code 0605) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0605 2518 A pair of Business Copy, Business Copy Release the pair definition, then retry the Z, or Compatible FlashCopy is defined. operation.

  • Page 44

    Table 21 Error codes (part code 0605) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0605 8102 This function is not supported. Check whether the DKCMAIN microcode version and the SVP microcode version are mismatched. 0605 8122 Another maintenance processing is in Wait for a while, then retry the progress.

  • Page 45

    Table 21 Error codes (part code 0605) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0605 58332 The external volume is blocked. Ensure that the external volume is not blocked, then retry the operation. 0605 58406 The configuration of Continuous Access Release the configuration definition of Journal or Continuous Access Journal Z Continuous Access Journal or Continuous...

  • Page 46

    Table 21 Error codes (part code 0605) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0605 65796 The External Path Group specified as a Clear the duplicated setting, then retry migration source has already been used the operation. as a migration target.

  • Page 47

    Table 21 Error codes (part code 0605) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0605 66509 The total LDEV capacity defined in the Check the setting of LDEV capacity. external volume exceeds the external volume size. 0605 66510 The specified emulation type cannot be...

  • Page 48

    Table 21 Error codes (part code 0605) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0605 66722 CacheMode is invalid. Check the setting of CacheMode. 0605 66724 InflowControl is invalid. Check the setting of InflowControl. 0605 66736 It is not set within the range where LDKC Check the setting of LDKC.

  • Page 49

    Table 21 Error codes (part code 0605) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0605 68802 The volume to be maintained includes Set the Audit Log buffer function to the system disk being used at Audit Log. “Disable,”...

  • Page 50: Part Code 00622

    Table 21 Error codes (part code 0605) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0605 78055 You do not have a permission to treat Verify the available parity groups. the external volumes composing the specified external path groups. 0605 78056 You do not have a permission to treat...

  • Page 51

    Table 22 Error codes (part code 00622) (continued) Part Error Error Message Recommended Action Severity Code Number Level 00622 105241 An external volume that can be added See the manual of the external device was not found by the result of and check the setting of the external VolumeDiscovery.

  • Page 52

    Table 22 Error codes (part code 00622) (continued) Part Error Error Message Recommended Action Severity Code Number Level 00622 106055 The selected emulation type cannot be Release the command device, or select set because a command device is set to another volume.

  • Page 53: Part Code 0710

    Table 22 Error codes (part code 00622) (continued) Part Error Error Message Recommended Action Severity Code Number Level 00622 107002 The processing cannot continue due to Refresh the window, then retry the an internal logic contradiction. operation. If the same problem persists despite retrying, please contact HP Technical Support.

  • Page 54: Part Code 0810

    Part code 0810 Table 24 Error codes (part code 0810) Part Error Error Message Recommended Action Severity Code Number Level 0810 65645 Enter up to 2,048 alphanumeric Enter up to 2,048 alphanumeric characters. characters. 0810 65646 Enter alphanumeric characters only. Enter alphanumeric characters only.

  • Page 55: Message (part Code Group 1nnn), Part Code 1005

    3 Message (part code group 1nnn) This chapter includes the error messages with the part code 1005 to 1310. Part code 1005 Table 25 Error codes (part code 1005) Part Error Error Message Recommended Action Severity Code Number Level 1005 1002 The specified volume cannot be set as a Select another volume.

  • Page 56

    Table 25 Error codes (part code 1005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 1005 1021 Invalid host mode. The configuration information has been changed already. Check the settings, and request the configuration information setting again. 1005 1022 Invalid host mode.

  • Page 57

    Table 25 Error codes (part code 1005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 1005 1 108 The following volumes cannot be Check the setting, then retry the specified when you change the operation. command device configurations: Volumes reserved by Auto LUN Volumes other than the open-system volumes (including unmounted...

  • Page 58

    Table 25 Error codes (part code 1005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 1005 1 135 When setting the port information (Fibre Check the setting(s), then retry the Address/Fibre Topology/Channel operation. Speed), multiple change instructions are set to the same port.

  • Page 59

    Table 25 Error codes (part code 1005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 1005 1356 You could not add the host group to the To add the host group, change the initiator or external port. attribute of the specified port to Target or RCU Target.

  • Page 60

    Table 25 Error codes (part code 1005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 1005 2009 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 1005 2010 The LDEV is being used by the host, or Recovery processing may take about 1 an error occurred in the SVP procedure.

  • Page 61

    Table 25 Error codes (part code 1005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 1005 5010 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 1005 5013 An error occurred during SVP If this problem persists, please contact processing.

  • Page 62

    Table 25 Error codes (part code 1005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 1005 56301 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 1005 56302 An error occurred during SVP If this problem persists, please contact processing.

  • Page 63: Part Code 01022

    Part code 01022 Table 26 Error codes (part code 01022) Part Error Error Message Recommended Action Severity Code Number Level 01022 105009 All the check boxes are cleared. Check the check boxes for the items that you want to change, then retry the operation.

  • Page 64

    Table 26 Error codes (part code 01022) (continued) Part Error Error Message Recommended Action Severity Code Number Level 01022 105025 The specified host name cannot be Check the setting(s). added because it is already used in the same port, or it exists in the [Selected Hosts] table.

  • Page 65

    Table 26 Error codes (part code 01022) (continued) Part Error Error Message Recommended Action Severity Code Number Level 01022 105045 [Detail] is clicked in the state of selecting Select one table row. multiple table rows. 01022 105046 HBA WWN cannot be converted into Specify the HBA WWN with 16 digits hexadecimal.

  • Page 66

    Table 26 Error codes (part code 01022) (continued) Part Error Error Message Recommended Action Severity Code Number Level 01022 105083 There is a radio button that is not Check the setting(s). selected. 01022 105084 The setting cannot be changed, because Check the setting(s).

  • Page 67

    Table 26 Error codes (part code 01022) (continued) Part Error Error Message Recommended Action Severity Code Number Level 01022 105253 [Enabled] has been set to the Host Mode To change the setting from Target/RCU Option for the Host Group #00 of the Target to Initiator/External, set only 00 specified port.

  • Page 68

    Table 26 Error codes (part code 01022) (continued) Part Error Error Message Recommended Action Severity Code Number Level 01022 106510 The specified host does not exist in the Refresh the window, then retry the configuration. operation. If the same problem persists despite retrying, please contact HP Technical Support.

  • Page 69

    Table 26 Error codes (part code 01022) (continued) Part Error Error Message Recommended Action Severity Code Number Level 01022 107005 The process cannot continue due to Retry the operation. If the same problem internal logic contradiction. occurs again, close the windows, refresh it, then retry again.

  • Page 70: Part Code 1305

    Table 26 Error codes (part code 01022) (continued) Part Error Error Message Recommended Action Severity Code Number Level 01022 108027 An error occurred. If the problem persists despite retrying, please contact HP Technical Support. 01022 108028 An error occurred. If the problem persists despite retrying, please contact HP Technical Support.

  • Page 71: Part Code 1310

    Part code 1310 Table 28 Error codes (part code 1310) Part Error Error Message Recommended Action Severity Code Number Level 1310 5832 The user name is incorrect. Correct the settings, then retry the operation. 1310 5833 The secret is incorrect. Correct the settings, then retry the operation.

  • Page 72

    Table 28 Error codes (part code 1310) (continued) Part Error Error Message Recommended Action Severity Code Number Level 1310 69053 This functionality is not available. Remote Web Console program product is required. 1310 69054 Insufficient permission to operate this. All of the following roles are required for this operation.

  • Page 73: Message (part Code Group 2nnn), Part Code 2005

    4 Message (part code group 2nnn) This chapter includes the error messages with the part code 2005 and 2010. Part code 2005 Table 29 Error codes (part code 2005) Part Error Error Message Recommended Action Severity Code Number Level 2005 1002 The specified volume cannot be set as a Select another volume.

  • Page 74

    Table 29 Error codes (part code 2005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 2005 1 137 Failed to form a LUSE volume because The configuration information has been the number of LUSE volumes exceeds the changed already.

  • Page 75

    Table 29 Error codes (part code 2005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 2005 1925 The combination order of LUSE volume Check the settings. is incorrect. 2005 2005 An error occurred during SVP If this problem persists, please contact processing.

  • Page 76: Part Code 2010

    Table 29 Error codes (part code 2005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 2005 6036 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 2005 6537 There is no error in this setting. However, There is no error in this setting.

  • Page 77

    Table 30 Error codes (part code 2010) (continued) Part Error Error Message Recommended Action Severity Code Number Level 2010 5054 More than 36 volumes cannot be Check the content of the operation. combined to form an LUSE. 2010 5055 The size of the LUSE volume exceeds Follow the correct operation procedure.

  • Page 78: Message (part Code Group 3nnn), Part Code 3005

    5 Message (part code group 3nnn) This chapter includes the error messages with the part code 3005 to 3305. Part code 3005 Table 31 Error codes (part code 3005) Part Error Error Message Recommended Action Severity Code Number Level 3005 1910 The specified volume contains Snapshot Check the setting of the specified...

  • Page 79

    Table 31 Error codes (part code 3005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3005 2095 A maintenance operation is in progress. Wait for a while, and retry. For example: LDEV formatting is in progress Correction Copy is in progress Drive Copy is in progress The CHA/DKA status is changing The cache status is changing...

  • Page 80

    Table 31 Error codes (part code 3005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3005 2516 One of the following is defined: a Delete the pair definition or suspend the Remote Copy pair, a Continuous pair, and then retry the operation. Access Journal pair, or a Continuous Access Journal Z pair.

  • Page 81

    Table 31 Error codes (part code 3005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3005 6050 An error occurred during SVP If nothing changes despite retrying, processing. contact HP Technical Support. 3005 6533 An error occurred during SVP If this problem persists, please contact processing.

  • Page 82

    Table 31 Error codes (part code 3005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3005 5551 1 The emulation type of the specified Specify another volume. volume is not OPEN-V. 3005 55512 The specified volume is an external Specify another volume.

  • Page 83

    Table 31 Error codes (part code 3005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3005 58467 The specified volume cannot be set as The current licensed capacity is a Pool-VOL, because it exceeds the insufficient. Please purchase a new licensed capacity.

  • Page 84

    Table 31 Error codes (part code 3005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3005 58575 An error occurred while connecting to If this problem persists, please contact the subsystem. HP Technical Support. 3005 58576 A communication time-out error If this problem persists, please contact occurred in the disk subsystem.

  • Page 85

    Table 31 Error codes (part code 3005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3005 65695 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 3005 65717 The specified volumes contain volumes Select only the volumes that can be that cannot be formatted.

  • Page 86

    If this problem persists, refer to the troubleshooting section in the HP The pool volume is blocked. StorageWorks P9000 Provisioning for Open Systems User Guide. 3005 68798 Failed to delete the pool.

  • Page 87

    Table 31 Error codes (part code 3005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3005 68821 The specified volume is currently used Wait until the process of Business Copy by Business Copy. is completed, then retry the operation. If this problem persists, please contact HP Technical Support.

  • Page 88

    Table 31 Error codes (part code 3005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3005 78009 You cannot expand the V-VOLs for the Retry the operation after Business Copy, volumes that are being used in Business Snapshot, Auto LUN, Continuous Access Copy, Snapshot, Auto LUN, Continuous Synchronous, Continuous Access Journal,...

  • Page 89

    Table 31 Error codes (part code 3005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3005 78027 The frequency distribution data cannot Wait for a while, then retry the be obtained because it is not complete. operation. 3005 78028 The frequency distribution data cannot...

  • Page 90

    Table 31 Error codes (part code 3005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3005 78044 The operation cannot be executed Execute any of the following actions, because the specified pool has one of then retry the operation. the following problems.

  • Page 91: Part Code 3010

    Table 31 Error codes (part code 3005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3005 78062 Failed to delete the pool. Delete the following pairs or volumes if any, then retry the operation. Pools cannot be deleted when they are in the following status: Snapshot pairs Thin Provisioning volumes...

  • Page 92: Part Code 03022

    Part code 03022 Table 33 Error codes (part code 03022) Part Error Error Message Recommended Action Severity Code Number Level 03022 105131 SSID cannot be allocated to all the LDEVs Check the setting(s). with the specified initial SSID. 03022 105132 Short of {0} LDEV ID(s).

  • Page 93

    Table 33 Error codes (part code 03022) (continued) Part Error Error Message Recommended Action Severity Code Number Level 03022 105154 0 cannot be specified. Check the setting(s). 03022 105155 A value other than the numerical value Check the setting(s). is specified. 03022 105156 The processing cannot continue due to...

  • Page 94

    Table 33 Error codes (part code 03022) (continued) Part Error Error Message Recommended Action Severity Code Number Level 03022 105179 An LDEV in Normal or Quick Formatting Check the setting(s). status is selected. 03022 105180 The selected LDEV has a reserved volume Check the setting(s).

  • Page 95: Part Code 03121

    Table 33 Error codes (part code 03022) (continued) Part Error Error Message Recommended Action Severity Code Number Level 03022 105249 Insufficient free space to create LDEV. Check the setting(s). 03022 105250 Two or more Basic exists together to Check the setting(s). External.

  • Page 96: Part Code 03122

    Part code 03122 Table 35 Error codes (part code 03122) Part Error Error Message Recommended Action Severity Code Number Level 03122 105264 The password is invalid. Check the password, then retry the operation. 03122 106005 No more pools can be registered, Check the support configuration of pools, because the number of registered pools then retry the operation.

  • Page 97

    Table 35 Error codes (part code 03122) (continued) Part Error Error Message Recommended Action Severity Code Number Level 03122 106023 The selected volumes cannot be specified Specify the volumes that have the same as a pool volume, because different CLPR, then retry the operation. CLPRs selected coexist.

  • Page 98

    Table 35 Error codes (part code 03122) (continued) Part Error Error Message Recommended Action Severity Code Number Level 03122 106041 There are no valid volumes, because the Restore the blocked status of the pools. pools are blocked. 03122 106042 The shrinking operation cannot be Check the pool capacity, the maximum performed on the specified pool.

  • Page 99

    Table 35 Error codes (part code 03122) (continued) Part Error Error Message Recommended Action Severity Code Number Level 03122 106099 The processing cannot continue due to If the problem persists, please contact an internal logic contradiction. HP Technical Support. 03122 106100 The operation cannot be done because Check the status of the pool, and then...

  • Page 100: Part Code 3205

    Part code 3205 Table 36 Error codes (part code 3205) Part Error Error Message Recommended Action Severity Code Number Level 3205 201 1 The status of the storage system requires Check the status of the storage system (if the maintenance (for example, the the storage system is blocked, shared storage system is blocked, the shared memory is inconsistent, or some other...

  • Page 101

    Table 36 Error codes (part code 3205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3205 6534 The number of V-VOLs that can be Reduce the number of V-VOLs registered registered in the storage system has in the storage system, then retry the reached the maximum.

  • Page 102

    Table 36 Error codes (part code 3205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3205 65740 The configuration changing processes Check if the configuration changing are conflicting at DKC. process by RAID Manager, Auto LUN, or Quick Restore is not in the operation, then retry the operation.

  • Page 103: Part Code 03222

    Table 36 Error codes (part code 3205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3205 68748 The number of Thin Provisioning volumes Check the configuration of the current that can be made in a single pool has V-VOL.

  • Page 104: Part Code 3305

    Table 37 Error codes (part code 03222) (continued) Part Error Error Message Recommended Action Severity Code Number Level 03222 105195 Zero is set in the size. Check the setting(s). 03222 105196 The size is not specified. Check the setting(s). 03222 105197 Other than the numerical value is set in Check the setting(s).

  • Page 105

    Table 38 Error codes (part code 3305) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3305 1043 An operation is specified for the Correct the settings, then retry the uninstalled VDEV. operation. 3305 1044 An error occurred during SVP If this problem persists, please contact processing.

  • Page 106

    Table 38 Error codes (part code 3305) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3305 2005 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 3305 201 1 The status of the disk subsystem requires If this problem persists, please contact maintenance (for example, the subsystem HP Technical Support.

  • Page 107

    Table 38 Error codes (part code 3305) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3305 2095 A maintenance operation is in progress. Wait a while, then retry the operation. For example: LDEV formatting is in progress Correction Copy is in progress Drive Copy is in progress The CHA/DKA status is changing...

  • Page 108

    Table 38 Error codes (part code 3305) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3305 2521 A Auto LUN pair is defined. Release the pair definition. If a reserve volume is defined, cancel the reservation and then retry the operation. 3305 2522 The volume is reserved by Auto LUN.

  • Page 109

    Table 38 Error codes (part code 3305) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3305 65691 Preparing for quick format. Check the status and wait until the status changes to a status that maintenance is possible. 3305 65728 The specified volume is not available to...

  • Page 110: Message (part Code Group 4nnn), Part Code 4005

    6 Message (part code group 4nnn) This chapter includes the error messages with the part code 4005 and 4010. Part code 4005 Table 39 Error codes (part code 4005) Part Error Error Message Recommended Action Severity Code Number Level 4005 5010 An error occurred during SVP If this problem persists, please contact...

  • Page 111

    Table 39 Error codes (part code 4005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 4005 55245 The number of cache residency areas set Check the settings, then retry the for the CLPR exceeds the maximum operation. available number of cache residency areas.

  • Page 112

    Table 39 Error codes (part code 4005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 4005 55540 The specified function is not available Install the necessary program product. because it requires Open System Array Management. 4005 55541 The specified function is not available Install the required program product.

  • Page 113: Part Code 4010

    Part code 4010 Table 40 Error codes (part code 4010) Part Error Error Message Recommended Action Severity Code Number Level 4010 1030 Part of the range is already in use. Correct the specified content, and issue the request again. 4010 1032 The specified value is outside the valid Correct the specified content, and issue...

  • Page 114: Message (part Code Group 5nnn), Part Code 5105

    7 Message (part code group 5nnn) This chapter includes the error messages with the part code 5105 to 5307. Part code 5105 Table 41 Error codes (part code 5105) Part Error Error Message Recommended Action Severity Code Number Level 5105 2002 An error occurred during SVP If this problem persists, please contact...

  • Page 115

    Table 41 Error codes (part code 5105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5105 6023 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 5105 6036 An error occurred during SVP If this problem persists, please contact processing.

  • Page 116: Part Code 5107, Part Code 05121

    Table 41 Error codes (part code 5105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5105 66016 A monitoring switch cannot be enabled Change the gathering interval, and retry with the specified gathering interval. the operation. 5105 66017 An error occurred during SVP If this problem persists, please contact...

  • Page 117: Part Code 05122

    Table 44 Error codes (part code 05121) (continued) Part Error Error Message Recommended Action Severity Code Number Level 05121 105003 No table row, or two or more table rows Select one table row. are selected. 05121 109001 Are you sure you want to remove the To continue the processing, click [OK].

  • Page 118

    Table 45 Error codes (part code 05122) (continued) Part Error Error Message Recommended Action Severity Code Number Level 05122 1051 12 The graph cannot be displayed, because Wait for a while, then retry the there is no graph data. operation. 05122 1051 13 The real time graph display will end due...

  • Page 119: Part Code 5205

    Table 45 Error codes (part code 05122) (continued) Part Error Error Message Recommended Action Severity Code Number Level 05122 107003 The process cannot continue due to Refresh the window, then retry the internal logic contradiction. operation. If the same problem persists despite retrying, please contact HP Technical Support.

  • Page 120

    Table 46 Error codes (part code 5205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5205 1084 The number of reserved volume that can Click [Refresh All] on the [File] menu, be set in the storage system exceeds the then retry the operation.

  • Page 121

    See the section about the computational methods of the number of movement plans described in the HP StorageWorks P9000 Auto LUN User Guide for the relation between the number of plans that can be made and the shared memory.

  • Page 122

    See Supported and prohibited source Business Copy pair volumes has reached and target volumes" in the HP the maximum. StorageWorks P9000 Performance for Open and Mainframe Systems User Guide if the volumes of Business Copy Z or Business Copy can be migrated.

  • Page 123

    Table 46 Error codes (part code 5205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5205 1235 The volume specified as a migration Specify another volume. target cannot be migrated, because it is used as S-VOL or R-VOL of Continuous Access Synchronous, Continuous Access Synchronous Z, or External Storage Access Manager.

  • Page 124

    Auto LUN with Continuous Synchronous, Continuous Access Access Synchronous and Continuous Synchronous Z, or External Storage Access Journal V-VOLs in the HP Access Manager in the Pending StorageWorks P9000 Auto LUN User status. Guide. 5205 5505 The volume(s) is already being used by Please Release the Remote Copy Pair.

  • Page 125

    Table 46 Error codes (part code 5205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5205 5510 This function has already executed. Wait for a moment and retry. 5205 6000 An error occurred during SVP If this problem persists, please contact processing.

  • Page 126

    Table 46 Error codes (part code 5205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5205 7403 Failed to get information from Retry the same operation several times. hihsmcls.ini. The file may not exist in the If the same error occurs, please contact specified directory.

  • Page 127

    Table 46 Error codes (part code 5205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5205 7419 The information on reserved volume is Retry the same operation several times. invalid. If the same error occurs, please contact HP Technical Support.

  • Page 128

    Table 46 Error codes (part code 5205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5205 8671 The sizes of the source and the target Specify the volumes with the same size volumes are not equal. for the source and the target of migration, then retry the operation.

  • Page 129

    Table 46 Error codes (part code 5205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5205 55432 The volume(s) are already being used Confirm the setting of the specified by Compatible FlashCopy. volume. 5205 55433 The volume(s) are already being used Confirm the setting of the specified by Compatible FlashCopy.

  • Page 130

    Continuous Access Journal or See "Supported and prohibited source Continuous Access Journal Z. and target volumes" in the HP StorageWorks P9000 Performance for Open and Mainframe Systems User Guide. 5205 55600 The specified volume is used as a volume...

  • Page 131

    "Auto LUN with internal volume of OPEN-V and a Thin Thin Provisioning virtual volumes" in the Provisioning volume of OPEN-0V. HP StorageWorks P9000 Performance for Open and Mainframe Systems User Guide. 5205 65714...

  • Page 132

    Table 46 Error codes (part code 5205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5205 65715 Migration cannot be executed because Check the setting of the specified volume. it is a migration between a Thin Provisioning volume and a normal volume that contains a component of a LUSE volume 5205...

  • Page 133: Part Code 5210

    Table 46 Error codes (part code 5205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5205 76503 The LDEV specified as a migration source Verify the available LDEVs. cannot be used because the LDEV has no access right for a resource group. 5205 76504 The LDEV specified as a migration target...

  • Page 134: Part Code 5305

    Table 47 Error codes (part code 5210) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5210 66800 This migration plan cannot be executed, Restore the pool associated to the target because the pool associated to the target volume, then retry the operation.

  • Page 135

    Table 48 Error codes (part code 5305) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5305 5102 The specified PFC group is not Check the specified content, and retry. registered. 5305 5104 The specified PFC group is already Check the specified content, and retry.

  • Page 136

    Table 48 Error codes (part code 5305) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5305 8918 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 5305 8919 The subsystem status is invalid. Retry the same operation several times.

  • Page 137

    Table 48 Error codes (part code 5305) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5305 57101 An error occurred during SVP The error may be caused by a temporary processing. communication failure. Reboot the SVP or click [Refresh All] on the File menu of Remote Web Console and refresh the configuration information to recover from the error.

  • Page 138: Part Code 5307

    Table 48 Error codes (part code 5305) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5305 58576 A communication time-out error occurred The error may be caused by a temporary in the disk subsystem. Please wait for a communication failure.

  • Page 139: Message (part Code Group 6nnn), Part Code 6005

    8 Message (part code group 6nnn) This chapter includes the error messages with the part code 6005 to 6810. Part code 6005 Table 50 Error codes (part code 6005) Part Error Error Message Recommended Action Severity Level Code Number 6005 5013 An error occurred during SVP If this problem persists,...

  • Page 140

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8700 Please retry operation. Retry the operation. 6005 8701 Logical Path between the MCU and the A logical path does not exist RCU is not active.

  • Page 141

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8712 The operation was rejected due to a If this was a path operation 'FREEZE' state. retry after the problem has been fixed.

  • Page 142

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8723 The Edit Path operation was rejected Add another path, or delete because the specified path is the last all pairs on the RCU. Then path of some Remote Copy pairs.

  • Page 143

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8735 Invalid RCU serial number, SSID, Link Check the serial number, Address or Controller ID. SSID and link address of the RCU, and set the correct value.

  • Page 144

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8744 The specified M-VOL condition is not The M-VOL is not available valid for Remote Copy. for the requested operation, because of one or more of the following reasons: The volume is blocked.

  • Page 145

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8749 Specified R-VOL is still online from Check if the input number of HOST. R-VOL is correct. If not, enter the correct R-VOL number. If the number is correct, vary the specified path offline.

  • Page 146

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8761 The operation failed because the status Verify the following of specified volume as following: conditions for the M-VOL and R-VOL are met: The emulation type of M-VOL and R-VOL do not match.

  • Page 147

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8772 Change pair operation failed due to The pair option change communication error or the R-VOL status operation failed, either is invalid. because a communication error occurred or because the R-VOL status is not valid.

  • Page 148

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8788 The specified expanded volume in the Check the Port, GID and RCU is not defined. LUN settings of the RCU. 6005 8789 Combination of the specified expansion...

  • Page 149

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8796 The operation failed because the Check the status of the specified R-VOL applied to any of the specified R-VOL from the following: host or the SVP.

  • Page 150

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8817 Preset Suspension is effective in the CT Cancel the preset suspension Group. in the CT group, then retry the operation. 6005 8818 Preset Suspension is effective in the CT...

  • Page 151

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8829 The LCP of the RCU cannot access the Take the following actions: specified R-VOL. Specify only one CU# for the same LCP of the RCU. Connect to the LCP that can access the specified R-VOL.

  • Page 152

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8840 Suspend(Pairsplit-r) operation is not Suspend mode is not valid valid for R-VOL. for the R-VOL. Check the volume, and retry. 6005 8841 The specified volume is not a R-VOL.

  • Page 153

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8849 Specified volume is not part of Remote The specified volume is not Copy pair (Not in Duplex(PAIR), part of a Continuous Access Pending(COPY), Suspend(PSUS) state).

  • Page 154

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8862 Please wait a few minutes and retry the The delete pair (Pairsplit-S) Delete Pair(Pairsplit-S) operation. operation failed. A few minutes later, refresh the window, confirm if the specified volumes are in the permissible status, then retry...

  • Page 155

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8892 R-VOLs exist on the RCU port. Are you If you want to continue this sure you want to continue this operation, click [Yes].

  • Page 156

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8906 No more space is left in RCU for If the extended shared differential management. memory (SM #2) is not installed in RCU, install the shared memory to RCU according to the installation instruction of the extended...

  • Page 157

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8921 The specified M-VOL must not be in an Check the status of the intervention-required condition, in a specified M-VOL. protection condition, in an unusable condition, the Business Copy/Business Copy Z T-VOL/reserved volume or a reserved volume of Auto LUN.

  • Page 158

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8943 The specified volume or other volume(s) Refresh the window a few of the same group in the RCU is being minutes later, and check the changed to Simplex/Suspend status.

  • Page 159

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8980 The operation failed because the Confirm the licensed licensed capacity of Mainframe Array capacity Mainframe Array Management on the RCU side was Management on the RCU exceeded.

  • Page 160

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 56524 This function cannot be used by the Please contact HP Technical storage partition administrator. Support. 6005 57005 An error occurred during SVP If the problem persists processing.

  • Page 161

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 58451 The disk subsystem is in internal If the problem persists process. Please retry the operation. despite retrying, please contact HP Technical Support.

  • Page 162

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 58509 A communication time-out error Wait a while, then retry the occurred between MCU and RCU. operation. Please wait for a while, and then retry the operation.

  • Page 163

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 68012 The operation failed because the Check whether the specified specified R-VOL was used as a Thin R-VOL is a Thin Provisioning Provisioning volume.

  • Page 164

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 68792 The operation failed because the Refresh the window, and specified volume was not an External confirm whether the Storage Access Manager pair volume. specified volume is an External Storage Access Manager pair volume.

  • Page 165

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 68827 The operation failed, because there was The serial number of the an error in the specified parameter. local DKC cannot be set as the serial number of the other DKC.

  • Page 166

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 68873 The operation failed, because the Specify another volume, or specified volume was defined in the LU release the LU path path.

  • Page 167: Part Code 6007

    Table 50 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 68893 The operation failed, because the Install the necessary following program products were not program products in the installed in the RCU. RCU.

  • Page 168: Part Code 6010

    Table 51 Error codes (part code 6007) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6007 6012 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 6007 6022 The SVP is busy. Please wait for a while, If the same problem persists despite and then retry the operation.

  • Page 169

    Table 52 Error codes (part code 6010) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6010 5138 The value specified for Gathering Interval Check the contents, and retry. is invalid. Specify a valid value within the range of 1 to 15. 6010 5139 The Script File Name value is invalid.

  • Page 170

    Table 52 Error codes (part code 6010) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6010 9024 Are you sure you want to exchange the Follow the instructions in the message. specified ports? Please confirm the associated channel paths are off-line. 6010 9025 Are you sure you want to switch the...

  • Page 171

    Table 52 Error codes (part code 6010) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6010 91 14 The value has been changed. Do you To continue the process, click [OK]. want to continue the operation? Otherwise, click [Cancel]. 6010 91 15 The monitoring was stopped by another...

  • Page 172

    Table 52 Error codes (part code 6010) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6010 9300 WARNING: Destination volume of Follow the instructions in the message. specified volume pair may contain some inconsistency, because volume copy is not completed yet.

  • Page 173

    Table 52 Error codes (part code 6010) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6010 9324 The specified operation is prohibited Try again after the script ends. while the script is running. 6010 9325 The script is terminated forcibly. Click [OK].

  • Page 174

    Table 52 Error codes (part code 6010) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6010 59031 The monitoring data saved at present To continue processing, click [OK]. To will be deleted when the monitoring stop processing, click [Cancel]. switch is set to Enable the next time.

  • Page 175

    Table 52 Error codes (part code 6010) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6010 69022 There are no RCUs available. Register Register RCUs in the CU or RCUs of CU RCUs in the CU or RCUs of CU Free, Free, then retry the operation.

  • Page 176: Part Code 6505

    Part code 6505 Table 53 Error codes (part code 6505) Part Error Error Message Recommended Action Severity Code Number Level 6505 3003 An error occurred during SVP If the problem persists despite retrying, processing. If this problem persists, please contact HP Technical Support. please contact HP Technical Support.

  • Page 177

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 8100 An error occurred during SVP Retry the operation. If this problem processing. If this problem persists, persists, please contact HP Technical please contact HP Technical Support.

  • Page 178

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 8719 The serial number or the controller ID of Check the serial number and the the remote subsystem is incorrect. controller ID of this remote storage system and already registered remote storage systems, then specify the correct values.

  • Page 179

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 8731 The existing logical addresses are not Delete the DKC once, then add the DKC the same. using the same logical address. 6505 8733 Continuous Access Journal or Continuous...

  • Page 180

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 8745 The secondary data volume is already Check whether the secondary data in use by another system. volume in the remote storage system, which are connected from hosts or the SVP, is in any of the following conditions:...

  • Page 181

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 8788 The specified volume is not defined in Check the port, GID, and LUN settings the secondary storage system. in the secondary storage system. 6505 8791 The specified primary data volume is...

  • Page 182

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 8831 The specified secondary data volume is Volumes reserved by Auto LUN cannot already reserved by Auto LUN. be specified as secondary data volumes. Check the status of the specified secondary data volume from the host or the SVP.

  • Page 183

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 8902 An error occurred during the port Please contact HP Technical Support. change. 6505 8903 Unknown Error Code. Please contact HP Technical Support. 6505 8915 Remote Web Console attempted to...

  • Page 184

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 8980 The operation failed because the Confirm the licensed capacity of the licensed capacity of Mainframe Array Mainframe Array Management of the Management on the remote subsystem remote storage system.

  • Page 185

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58024 The specified cache value for master Check the specified cache value for journal is invalid. master journal. 6505 58025 The specified cache value for restore Check the specified cache value for journal is invalid.

  • Page 186

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58064 Too many requests. Please reduce the Reduce the number of requests to be number of requests to be processed at processed at one time.

  • Page 187

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58085 The specified primary data volume is not Check the data volumes in the specified registered in the specified journal. journal. 6505 58086 The specified master journal is not...

  • Page 188

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58100 The serial number or the controller ID of Check the serial number and the the remote subsystem is incorrect. controller ID of this remote storage system and already registered remote storage systems, then specify the correct values.

  • Page 189

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58264 Journal volumes cannot be registered Install Continuous Access Journal. because Continuous Access Journal is not installed. 6505 58265 Journal volumes cannot be registered Install Continuous Access Journal Z.

  • Page 190

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58276 The specified secondary data volumes Check the status of the specified cannot be paired with another volume, secondary data volume. because the secondary data volume is used as a journal volume.

  • Page 191

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58291 The specified secondary data volume is Check the status of the specified not paired with any another volume. secondary data volume. 6505 58292 The specified journal volume is unusable.

  • Page 192

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58306 The specified secondary data volume is Check the configuration of the specified used as a command device. secondary data volume. 6505 58307 The specified secondary data volume is...

  • Page 193

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58336 The specified volume cannot be Check the CLPR number of the registered registered as a journal volume because journal volume, and specify the volume the CLPR number of the specified volume that has the same CLPR number.

  • Page 194

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58349 The Add Pair operation failed because From the Volume Retention window, the specified primary data volume had check the settings of the specified a Protect attribute set by Volume primary data volume.

  • Page 195

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58355 The specified secondary data volume is Check whether the specified secondary used by one of the following program data volume is used by the following products.

  • Page 196

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58490 Only the pair option of the primary data A communication error between the volume was updated. Failed to update primary and the secondary storage the pair option of the secondary data systems occurred, or the microcode of volume.

  • Page 197

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58510 The Add Pair (Paircreate) operation Check the mirror ID assigned to the failed. specified primary data volume number (LDKC:CU:LDEV) from the secondary The combination of the specified primary storage system, and assign a mirror ID data volume number (LDKC:CU:LDEV)

  • Page 198

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58563 The specified volume cannot be Retry the operation. registered because the volume has failed If this problem persists, please contact to recover from blockade.

  • Page 199

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58596 The operation to change the status to the Check if the At-Time Split is set to the status ready for Delta resync failed specified restore journal with Business because At-Time Split was set to the Continuity Manager.

  • Page 200

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 5861 1 The specified operation failed because Retry the operation after the microcode the microcode exchange was in progress exchange completes. on the subsystem in the extended consistency group (EXCTG).

  • Page 201

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58628 Journals cannot be added to the Check the attribute of the journals in the specified extended consistency group specified extended consistency group (EXCTG), because different journal (EXCTG).

  • Page 202

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58687 The status of the other mirror of the Delta If the problem persists despite retrying, resync did not change. contact HP Technical Support. 6505 58688 Delta resync failed because the specified...

  • Page 203

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58697 The journal volume cannot be deleted Check the mirror status of the specified from the specified journal due to the journal.

  • Page 204

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58705 The Delta resync operation failed. The Check the status of the specified specified secondary data volume should secondary data volume. meet the following requirements.

  • Page 205

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58718 The licensed capacity of Continuous Check the licensed capacity of this Access Journal or Continuous Access program product and the related Journal Z on the RCU is insufficient.

  • Page 206

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 66591 The number of digits of CU (P-VOL) is Check the contents of the spreadsheet. invalid. 6505 66592 The format of CU (P-VOL) is invalid. Check the contents of the spreadsheet.

  • Page 207

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 66616 The value entered as LDEV (local VOL) Check the contents of the spreadsheet. is outside the setting range. 6505 66617 The number of digits of LDKC (paired Check the contents of the spreadsheet.

  • Page 208

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 66641 The value entered as DKCSN is outside Check the contents of the spreadsheet. the setting range. 6505 66642 The number of digits of ControllerID is Check the contents of the spreadsheet.

  • Page 209

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 66667 The format of S-VOLWrite is invalid. Check the contents of the spreadsheet. 6505 66668 The value entered as S-VOLWrite is Check the contents of the spreadsheet.

  • Page 210

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 68006 The Add Pair (Paircreate) operation Check if the LDKC number of the primary failed. data volume and the LDKC number of the master journal are the same.

  • Page 211

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 68025 The specified primary data volume is Install the Disaster Recovery Extended used as a pair volume of Continuous function in the primary storage system. Access Synchronous, External Storage Access Manager, or Continuous Access Synchronous Z.

  • Page 212

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 68783 The Paircreate operation failed because The specified master journal group runs the specified primary data volume was on the 2DC configuration in which the used by Continuous Access Synchronous Continuous Access Synchronous or or External Storage Access Manager.

  • Page 213

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 68843 The operation failed, because the Retry the operation after the completion specified primary data volume was a of discarding zero data on the specified volume of Thin Provisioning whose zero volume.

  • Page 214

    Table 53 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 68863 The operation failed, because the Check the number of remote command number of assignable remote command devices which has been assigned to a device to a mirror exceeded the mirror.

  • Page 215: Part Code 6507, Part Code 6510

    Part code 6507 Table 54 Error codes (part code 6507) Part Error Error Message Recommended Action Severity Code Number Level 6507 5036 Two or more commands which were not Check the settings, and retry the able to be processed were demanded. operation.

  • Page 216

    Table 55 Error codes (part code 6510) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6510 8101 The system cannot apply the new Click [Refresh], and retry. configuration. Do you want to refresh? 6510 9006 Exchange the channel cable connections Check the port type, then change cable after confirmation of the port type.

  • Page 217

    Table 55 Error codes (part code 6510) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6510 91 16 Another operator has changed the Click [OK]. Gathering Interval value. The graph will be closed. 6510 91 17 Are you sure you want to close the To close the graph, click [OK].

  • Page 218

    Table 55 Error codes (part code 6510) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6510 55037 Too many mirrors in the journal. Check the number of mirrors in the journal. Then delete unused mirrors, or register them in another journal. 6510 55038 Too many mirrors in the subsystem.

  • Page 219

    Table 55 Error codes (part code 6510) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6510 59004 An error occurred. Please check the error Check the error information. details. 6510 59005 An invalid value is specified. Specify the valid value. 6510 59006 No more journal volumes can be...

  • Page 220

    Table 55 Error codes (part code 6510) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6510 59043 The number of journal volumes in some Reduce the number of journal volumes journals exceeds the maximum. to be registered, or increase the number of journal volumes to be deleted.

  • Page 221

    Table 55 Error codes (part code 6510) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6510 59325 A pair which is ready for Delta resync Check the status of the specified master cannot be created under the current journal.

  • Page 222: Part Code 6610

    Table 55 Error codes (part code 6510) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6510 65780 The same mirror ID is specified in the Specify different mirror IDs in the mirror mirror 1 and the mirror 2 parameters. 1 and the mirror 2 parameters.

  • Page 223

    Table 56 Error codes (part code 6610) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6610 8101 The system cannot apply the new Click [Refresh], and retry. configuration. Do you want to refresh? 6610 9006 Exchange the channel cable connections Check the port type, then change cable after confirmation of the port type.

  • Page 224

    Table 56 Error codes (part code 6610) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6610 91 13 Are you sure you want to clear SIMs of To clear SIMs, click [Yes]. Otherwise, Continuous Access Journal and click [No].

  • Page 225

    Table 56 Error codes (part code 6610) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6610 9332 This operation is not applied yet. Click [OK], then continue the operation. 6610 55036 Too many data volumes in the journal. Check the number of data volumes in the journal.

  • Page 226

    Table 56 Error codes (part code 6610) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6610 56522 There are no consistency groups There are no consistency groups available. Please create unused available. Create unused consistency consistency groups and then retry the groups, then retry the operation.

  • Page 227

    Table 56 Error codes (part code 6610) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6610 59041 Warning: To delete the journal volume, click [Yes]. Otherwise, click [No]. A mainframe volume is included in the journal volumes to be deleted. HP recommends that you record the LDKC number, the CU number and the Note that the following points if you have...

  • Page 228

    Table 56 Error codes (part code 6610) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6610 591 13 Multiple CLPR numbers are existing in Check the CLPR number of the specified the specified volume, or you tried to volume and the CLPR numbers of volumes register a volume different from the CLPR if it is already existed.

  • Page 229

    Table 56 Error codes (part code 6610) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6610 59326 Specify a mirror ID other than "0" if you Specify a mirror ID other than 0. create a pair ready for Delta resync. 6610 59327 You cannot specify [Entire] or [None] to...

  • Page 230: Part Code 6805

    Table 56 Error codes (part code 6610) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6610 69017 No more journals can be registered, Check the number of registered journals. because the number of registered journals has reached the maximum. 6610 69018 There are two or more LDKC numbers...

  • Page 231

    Table 57 Error codes (part code 6805) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6805 8310 The storage system status is invalid. If this problem persists, please contact HP Technical Support. 6805 8659 No PCBs are installed. Install the necessary PCBs.

  • Page 232: Part Code 6810

    Part code 6810 Table 58 Error codes (part code 6810) Part Error Error Message Recommended Action Severity Code Number Level 6810 5122 No data has been changed. The operation has been rejected because there is no data to set. Click [OK], then go on to the next operation.

  • Page 233: Message (part Code Group 7nnn), Part Code 7005

    9 Message (part code group 7nnn) This chapter includes the error messages with the part code 7005 to 71 10. Part code 7005 Table 59 Error codes (part code 7005) Part Error Error Message Recommended Action Severity Code Number Level 7005 5013 An error occurred during SVP...

  • Page 234

    See the section "Operations permitted because the operation cannot be for L1, L2 pairs" in the HP StorageWorks accepted in the current pair status. P9000 Business Copy User Guide for the relation between the status of pairs and the commands that can be accepted.

  • Page 235

    Continuous Access Journal pair. See the section "Sharing Business Copy volumes" in the HP StorageWorks P9000 Business Copy User Guide for the relation between the status of Continuous Access Journal pair and the Business Copy operations.

  • Page 236

    Table 59 Error codes (part code 7005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7005 8537 The cache capacities do not match. Please contact HP Technical Support. 7005 8538 An SM failure was detected. Please contact HP Technical Support. 7005 8539 There is insufficient shared memory to...

  • Page 237

    The command has been rejected, See the section "Planning number of because the area of the differential table pairs" in the HP StorageWorks P9000 or pair table to set pairs is insufficient. Business Copy User Guide for the relation between the number of pairs that can be created and the shared memories.

  • Page 238

    P-VOL any more. the specified P-VOL has reached the See the section "Volume pairs (P-VOLs maximum. and S-VOLs)" in the HP StorageWorks P9000 Business Copy User Guide for the composition of pairs. 7005 8598 The specified volume is not a P-VOL.

  • Page 239

    Continuous Access Synchronous pair. pair. See the section about sharing Business Copy volumes in the HP StorageWorks P9000 Business Copy User Guide for the relationship between the state of the Continuous Access Synchronous pair and the Business Copy operations. 7005 8608 The specified S-VOL is not defined.

  • Page 240

    Table 59 Error codes (part code 7005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7005 8619 The specified S-VOL is defined as a Release the Auto LUN setting. source volume for Auto LUN. 7005 8622 The command has been rejected, The P-VOL of Continuous Access because the specified volume is used as Synchronous pair cannot be used as a...

  • Page 241

    P-VOL of the other pair and the operation. pair is in the COPY(RS-R) status. See the section "Operations permitted for L1, L2 pairs" in the HP StorageWorks P9000 Business Copy User Guide for the relation between the status of pairs and Business Copy operations. 7005 8643...

  • Page 242

    Table 59 Error codes (part code 7005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7005 8654 Boot device and S-VOL do not match in Check the target volume number. Paircreate, Pairresync, or Pairsplit-S instructions. 7005 8655 An invalid secondary SSID is specified Check the contents, and retry.

  • Page 243

    Continuous Access Synchronous pair. pair. See the section about sharing Business Copy volumes in the HP StorageWorks P9000 Business Copy User Guide for the relationship between the state of the Continuous Access Synchronous pair and the Business Copy operations. Part code 7005 243...

  • Page 244

    Continuous Access Synchronous pair. pair. See the section about sharing Business Copy volumes in the HP StorageWorks P9000 Business Copy User Guide for the relationship between the state of the Continuous Access Synchronous pair and the Business Copy operations. 7005...

  • Page 245

    Table 59 Error codes (part code 7005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7005 58482 The operation cannot be performed, Release the Snapshot pair, or select because the specified reserved volume another volume. is a P-VOL for Snapshot. 7005 58483 The operation cannot be performed,...

  • Page 246

    Continuous Access Journal. Journal pair. See the section about sharing Business Copy volumes in the HP StorageWorks P9000 Business Copy User Guide for the relationship between the state of the Continuous Access Synchronous pair and the Business Copy operations.

  • Page 247

    Table 59 Error codes (part code 7005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7005 68738 The command has been rejected, Associate the Thin Provisioning volume because the specified S-VOL is a Thin with a pool, then retry the operation. Provisioning volume not associated with a pool.

  • Page 248

    P-VOL failed due to one of the functions described in the HP following reasons. StorageWorks P9000 Business Copy User Guide for the relation between the The specified volume was used by state of Continuous Access Journal pair Delta resync of Continuous Access and the Business Copy operations.

  • Page 249

    Table 59 Error codes (part code 7005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7005 68924 The specified volume is a volume of Specify another volume. using two mirrors, which are included in 3DC cascade, 3DC multi target, or Delta resync configuration.

  • Page 250: Part Code 7007, Part Code 7010

    Part code 7007 Table 60 Error codes (part code 7007) Part Error Error Message Recommended Action Severity Code Number Level 7007 6012 An error occurred during SVP If this problem persists, please contact processing. If this problem persists, HP Technical Support. please contact HP Technical Support.

  • Page 251

    Table 61 Error codes (part code 7010) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7010 7310 Unregistered error code. Please contact HP Technical Support. 7010 731 1 The settings could not be applied. Wait a while, and retry the operation. If the same error occurs despite retrying, please contact HP Technical Support.

  • Page 252: Part Code 7105

    Table 61 Error codes (part code 7010) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7010 59069 The P-VOL and the S-VOL belong to Please contact HP Technical Support. different SLPRs. If you perform this operation, the storage partition administrator will become unable to operate.

  • Page 253

    (See the status of the pair. HP StorageWorks P9000 Business Copy for Mainframe Systems User Guide for the relation between the composition of the pair, status of the pair, or the volume status of the pair and those operations.)

  • Page 254

    Continuous Access Journal Z pair. See the section "Sharing Business Copy Z volumes" in the HP StorageWorks P9000 Business Copy for Mainframe Systems User Guide for the relation between the status of Continuous Access Journal Z pair and the Business Copy Z operations.

  • Page 255

    Table 62 Error codes (part code 7105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7105 8539 There is insufficient shared memory to There is insufficient shared memory in create 4096 pairs. DKC. Please contact HP Technical Support.

  • Page 256

    The command has been rejected, See the section "Planning number of because the area of the differential table pairs" in the HP StorageWorks P9000 or pair table to set pairs is insufficient. Business Copy for Mainframe Systems User Guide for the relation between the number of pairs that can be created and the shared memories.

  • Page 257

    S-VOL any more. the specified S-VOL has reached the See the section "Volume pairs (S-VOLs maximum. and T-VOLs)" in the HP StorageWorks P9000 Business Copy for Mainframe Systems User Guide for the composition of pairs. 7105 8598 The specified volume is not an S-VOL.

  • Page 258

    Continuous Access Synchronous Z pair. Synchronous Z pair. See the section "Sharing Business Copy Z volumes" in the HP StorageWorks P9000 Business Copy for Mainframe Systems User Guide for the relation between the state of Continuous Access Synchronous Z pair and the Business Copy Z operations.

  • Page 259

    Table 62 Error codes (part code 7105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7105 8618 The T-VOL is already defined as an Check the volume number. S-VOL. 7105 8619 The specified T-VOL is defined as a Release the Auto LUN setting.

  • Page 260

    Split. See the section "Resynchronize pairs" in the HP StorageWorks P9000 Business Copy for Mainframe Systems User Guide for the relation between the state of pairs and the Business Copy Z operations.

  • Page 261

    Table 62 Error codes (part code 7105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7105 8657 The Swap&Freeze option cannot be Please contact HP Technical Support. specified, because the mode 80 is on. 7105 8696 The command has been rejected, Release the relationship to delete the because the specified S-VOL is being Compatible FlashCopy pair, or specify...

  • Page 262

    Continuous Access Synchronous Z pair. Synchronous Z pair. See the section "Sharing Business Copy Z volumes" in the HP StorageWorks P9000 Business Copy for Mainframe Systems User Guide for the relation between the state of Continuous Access Synchronous Z pair and the Business Copy Z operations.

  • Page 263

    Continuous Access Synchronous Z pair. Z pair. See the section "Sharing Business Copy Z volumes" in the HP StorageWorks P9000 Business Copy for Mainframe Systems User Guide for the relation between the state of Continuous Access Synchronous Z pair and the Business Copy Z operations.

  • Page 264

    Journal Z pair. See the section "Sharing Business Copy Z volumes" in the HP StorageWorks P9000 Business Copy for Mainframe Systems User Guide for the relation between the state of Continuous Access Journal Z pair and the Business Copy Z operations.

  • Page 265

    Table 62 Error codes (part code 7105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7105 68747 The command has been rejected Cancel the setting where the T-VOL is because the FICON(R) Data Migration used by the other program products, and source volume is used in the specified then retry the operation.

  • Page 266

    Table 62 Error codes (part code 7105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7105 68776 The command has been rejected The specified operation cannot be because the T-VOL of the specified pair executed in the current pair is a FICON(R) Data Migration Source configuration.

  • Page 267

    Part code 71 10 Table 63 Error codes (part code 71 10) Part Error Error Message Recommended Action Severity Code Number Level 71 10 51 15 The T-VOL size differs from the specified Check the capacity of S-VOL and T-VOL. source volume size.

  • Page 268

    Table 63 Error codes (part code 71 10) (continued) Part Error Error Message Recommended Action Severity Code Number Level 71 10 9005 An error occurred. Check the error code. An error occurred during the indicated operation. See the error code for each operation in Preview list.

  • Page 269

    Table 63 Error codes (part code 71 10) (continued) Part Error Error Message Recommended Action Severity Code Number Level 71 10 66560 The maximum number of Pairs or Change the number of the Preview data Volumes that can be displayed in the to 16,384 or less.

  • Page 270: Message (part Code Group 8nnn), Part Code 8005

    10 Message (part code group 8nnn) This chapter includes the error messages with the part code 8005 to 8805. Part code 8005 Table 64 Error codes (part code 8005) Part Error Error Message Recommended Action Severity Code Number Level 8005 2002 An error occurred during SVP If this problem persists, please contact...

  • Page 271

    Table 64 Error codes (part code 8005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8005 7060 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 8005 71 1 1 The storage system is in the internal Wait, then click [Refresh].

  • Page 272: Part Code 8105

    Table 64 Error codes (part code 8005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8005 65783 There are functions that cannot change Confirm the setting status of the current the system disk option due to one of the system disk option.

  • Page 273

    Table 65 Error codes (part code 8105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8105 1007 Failed to remove the path. The specified Check the setting. path is the last path of the volumes used for Remote Copy, Business Copy, Auto LUN, or Snapshot.

  • Page 274

    Table 65 Error codes (part code 8105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8105 1066 WWN number, which is not registered, The configuration information has been is specified. (When deleting, or changed already. Check the settings, changing.) and request the configuration information setting again.

  • Page 275

    Table 65 Error codes (part code 8105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8105 1 125 There are no host groups where the The configuration information has been WWN will be registered. changed already. Check the settings, and request the configuration information setting again.

  • Page 276

    Table 65 Error codes (part code 8105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8105 1352 Logical paths remain on the Fibre-MCU Since the port you are trying to set is for port. This operation may cause a fatal Remote Copy, you must delete the logical damage to the logical paths.

  • Page 277

    Table 65 Error codes (part code 8105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8105 1918 An external volume is mapped to the Delete the external volume that is external port to be operated. mapped to the external port to be operated, then retry the operation.

  • Page 278

    Table 65 Error codes (part code 8105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8105 2510 No path can be set to the specified Please contact HP Technical Support and volume because the addition of volumes finish adding volumes.

  • Page 279

    Table 65 Error codes (part code 8105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8105 5061 The number of lines is invalid. The CSV file can have up to 70,000 lines. 8105 5062 The size of the CSV file is invalid. Check the CSV file.

  • Page 280

    Table 65 Error codes (part code 8105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8105 5747 The group cannot be added. Change Correct the name of the group. the name of the group. 8105 5748 The group ID does not exist. Correct the group ID.

  • Page 281: Part Code 8107

    Table 65 Error codes (part code 8105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8105 6012 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 8105 6023 The SVP is busy. Please wait for a while, If the same problem persists despite and then retry the operation.

  • Page 282

    Part code 81 10 Table 67 Error codes (part code 81 10) Part Error Error Message Recommended Action Severity Code Number Level 81 10 5001 Starting file transfer client. Wait about three minutes, then retry. 81 10 5002 Inaccurate data was acquired. The acquired data is inaccurate.

  • Page 283: Part Code 8210, Part Code 8222, Part Code 8305, Part Code 8505

    Part code 8210 Table 68 Error codes (part code 8210) Part Error Error Message Recommended Action Severity Code Number Level 8210 7440 An error occurred during processing. If If this problem persists, contact HP this problem persists, please contact HP Technical Support.

  • Page 284

    Table 71 Error codes (part code 8505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8505 6012 An error occurred during SVP If this problem persists, please contact processing. If this problem persists, HP Technical Support. please contact HP Technical Support. 8505 6022 An error occurred during SVP...

  • Page 285

    Table 71 Error codes (part code 8505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8505 55016 The value set as the maximum number Please contact HP Technical Support. of connections to each SLPR is invalid. SLPR No:%s 8505 55017 The total of the values registered as the...

  • Page 286

    Table 71 Error codes (part code 8505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8505 55033 The same port is already registered in a Please contact HP Technical Support. different SLPR. 8505 55228 This function is not available. Install the program product.

  • Page 287: Part Code 8507

    Table 71 Error codes (part code 8505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8505 58315 A maintenance job is running in the disk Retry the operation after the maintenance subsystem (Correction Copy, Drive Copy, job is completed. LDEV formatting, LDEV shredding, and If LDEV formatting, LDEV shredding or Extent shredding).

  • Page 288: Part Code 8510

    Part code 8510 Table 73 Error codes (part code 8510) Part Error Error Message Recommended Action Severity Code Number Level 8510 5030 The displayed information has not been Specify what you want to register, and changed. then retry the operation. 8510 7060 An error occurred in the client logic.

  • Page 289: Part Code 8605

    Table 73 Error codes (part code 8510) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8510 59067 The maximum number of SSIDs that can Check the settings. be registered will be registered except the duplicate SSIDs. 8510 59101 The SSID(s) are associated with the Check the settings.

  • Page 290: Part Code 8610

    Table 74 Error codes (part code 8605) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8605 65754 The number of characters specified in an Confirm the e-mail address or the server e-mail address or a server address address, then retry the registration within exceeds 255 characters.

  • Page 291: Part Code 8805

    Table 75 Error codes (part code 8610) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8610 65761 The IP address of the mail server is Enter the IP address or the host name. invalid. Check the value if it is set as one of the following.

  • Page 292

    Table 76 Error codes (part code 8805) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8805 6036 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 8805 6091 An error occurred while compressing a If the same problem persists despite file.

  • Page 293: Message (part Code Group 9nnn), Part Code 9005

    1 1 Message (part code group 9nnn) This chapter includes the error messages with the part code 9005 to 9610. Part code 9005 Table 77 Error codes (part code 9005) Part Error Error Message Recommended Action Severity Code Number Level 9005 5013 An error occurred during SVP...

  • Page 294: Part Code 9007

    Table 77 Error codes (part code 9005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 9005 71 15 An error occurred during SVP If this problem persists, please contact processing. If this problem persists, HP Technical Support. please contact HP Technical Support.

  • Page 295: Part Code 9010, Part Code 9105

    Part code 9010 Table 79 Error codes (part code 9010) Part Error Error Message Recommended Action Severity Code Number Level 9010 7440 An error occurred during processing. If If the same problem persists despite this problem persists, please contact HP retrying, please contact HP Technical Technical Support.

  • Page 296

    Table 80 Error codes (part code 9105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 9105 5608 The pool group cannot include volumes Click [OK], check the attributes of the to which LU paths are defined, or specified volumes, and retry the volumes which are not mounted.

  • Page 297: Part Code 9107

    Table 80 Error codes (part code 9105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 9105 67002 The specified security group name has Specify another security group name. already been used by another LDKC. 9105 67003 The specified host group name has Specify another host group name.

  • Page 298

    Table 82 Error codes (part code 91 10) (continued) Part Error Error Message Recommended Action Severity Code Number Level 91 10 5617 Attributes of the security group differ Click [OK], check attributes of the from the attributes of other related security group, and retry the operation.

  • Page 299: Part Code 9205

    Table 82 Error codes (part code 91 10) (continued) Part Error Error Message Recommended Action Severity Code Number Level 91 10 9084 The specified group includes some hosts. To delete the group, click [Yes]. Are you sure you want to delete the Otherwise, click [No].

  • Page 300

    Table 83 Error codes (part code 9205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 9205 6023 An error occurred during SVP If this problem persists, please contact processing. If this problem persists, HP Technical Support. please contact HP Technical Support. 9205 6038 The mistake is found in the set...

  • Page 301

    Table 83 Error codes (part code 9205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 9205 66000 The version number entered in the Check the contents of the Volume spreadsheet is incorrect. Retention spreadsheet. 9205 66001 The function name entered in the Check the contents of the Volume spreadsheet is incorrect (The function Retention spreadsheet.

  • Page 302: Part Code 9210, Part Code 9605

    Part code 9210 Table 84 Error codes (part code 9210) Part Error Error Message Recommended Action Severity Code Number Level 9210 7060 An error occurred during processing. If If this problem persists, please contact this problem persists, please contact HP HP Technical Support.

  • Page 303

    Table 85 Error codes (part code 9605) (continued) Part Error Error Message Recommended Action Severity Code Number Level 9605 7310 This error code is not registered. If this problem persists, please contact HP Technical Support. 9605 8001 An error occurred while connecting to Retry a little later.

  • Page 304

    Table 85 Error codes (part code 9605) (continued) Part Error Error Message Recommended Action Severity Code Number Level 9605 8152 You cannot set a retention term to any Specify an open-systems volume. mainframe volumes. 9605 8153 The specified retention term exceeds the Correct the retention term, then retry the maximum.

  • Page 305: Part Code 9610

    Table 85 Error codes (part code 9605) (continued) Part Error Error Message Recommended Action Severity Code Number Level 9605 58438 This logical volume is configured as a Check the logical volume configuration, command device. then retry the operation. 9605 58442 The emulation type of the logical volume Select a logical volume whose emulation is not OPEN-V.

  • Page 306: Message (part Code Group 10nnn), Part Code 10010, Part Code 10121

    12 Message (part code group 10nnn) This chapter includes the error messages with the part code 10010 and 10122. Part code 10010 Table 87 Error codes (part code 10010) Part Error Error Message Recommended Action Severity Code Number Level 10010 5501 1 0 cannot be specified in all the fields or Reply to the message.

  • Page 307: Part Code 10122

    Part code 10122 Table 89 Error codes (part code 10122) Part Error Error Message Recommended Action Severity Code Number Level 10122 105194 An error occurred while formatting. Retry the operation. If the same problem persists despite retrying, please contact HP Technical Support. 10122 105195 An error occurred while preparing the...

  • Page 308

    Table 89 Error codes (part code 10122) (continued) Part Error Error Message Recommended Action Severity Code Number Level 10122 107002 An internal logic error occurred. If the problem persists despite retrying, please contact HP Technical Support. 10122 107003 The processing cannot continue due to Refresh the window, then retry the an internal logic contradiction.

  • Page 309: Message (part Code Group 20nnn), Part Code 20020

    13 Message (part code group 20nnn) This chapter includes the error messages with the part code 20020 to 20722. Part code 20020 Table 90 Error codes (part code 20020) Part Error Error Message Recommended Action Severity Code Number Level 20020 107000 An error occurred during SVP If this problem persists, please contact...

  • Page 310

    Table 90 Error codes (part code 20020) (continued) Part Error Error Message Recommended Action Severity Code Number Level 20020 107020 A file or a directory of the specified path Check the environment of file or directory does not exist, or the access is rejected. of the specified path.

  • Page 311

    Table 90 Error codes (part code 20020) (continued) Part Error Error Message Recommended Action Severity Code Number Level 20020 107042 Failed to start the session due to no user Confirm whether you are authorized. authority. 20020 107043 Failed to save the specific information of Check the environment.

  • Page 312

    Table 90 Error codes (part code 20020) (continued) Part Error Error Message Recommended Action Severity Code Number Level 20020 107059 The key store file does not exist. Check the environment. 20020 107060 Failed to get a certificate. Check the environment. 20020 107061 Failed to access the key store file.

  • Page 313: Part Code 20121

    Table 90 Error codes (part code 20020) (continued) Part Error Error Message Recommended Action Severity Code Number Level 20020 107094 The number of onetime keys has Wait for a while, then retry the exceeded the maximum. operation. 20020 107095 Failed to authenticate the user account. Check the environment.

  • Page 314

    Table 91 Error codes (part code 20121) (continued) Part Error Error Message Recommended Action Severity Code Number Level 20121 107024 A connection error has occurred. Check the internet protocol (IP) address. If the IP address is correct, terminate the browser (also terminate the storage list browser), then log it in again.

  • Page 315: Part Code 20122

    Table 91 Error codes (part code 20121) (continued) Part Error Error Message Recommended Action Severity Code Number Level 20121 108001 Version mismatch between the Remote Clear the cache of JRE and browser Web Console and the SVP. being used, then restart the browser and retry the operation.

  • Page 316

    Table 92 Error codes (part code 20122) (continued) Part Error Error Message Recommended Action Severity Code Number Level 20122 105065 The task cannot be aborted. The status of the task might be changed. Close the window, then check the task status.

  • Page 317

    Table 92 Error codes (part code 20122) (continued) Part Error Error Message Recommended Action Severity Code Number Level 20122 106079 The specified item could not be Please confirm contexture structure. displayed because the configuration had been changed. 20122 106089 Are you sure to execute "Shred LDEVs"? If you do not want to continue, click This task execution deletes all of the [Cancel] and go back to Delete LUN...

  • Page 318: Part Code 20123

    Part code 20123 Table 93 Error codes (part code 20123) Part Error Error Message Recommended Action Severity Code Number Level 20123 107000 An internal logic error occurred. If the problem persists despite retrying, please contact HP Technical Support. 20123 107001 An internal logic error occurred.

  • Page 319

    Table 93 Error codes (part code 20123) (continued) Part Error Error Message Recommended Action Severity Code Number Level 20123 107016 A network error occurred. It is not Check the internet protocol (IP) address. possible to connect with the SVP due to If the IP address is correct, terminate the one of the following reasons.

  • Page 320: Part Code 20222

    Table 93 Error codes (part code 20123) (continued) Part Error Error Message Recommended Action Severity Code Number Level 20123 107028 A network error occurred. The causes You cannot connect to the SVP because might be one of the following. of factors, such as a network error or SVP error.

  • Page 321

    Table 94 Error codes (part code 20222) (continued) Part Error Error Message Recommended Action Severity Code Number Level 20222 105007 A task which is being executed is in the Select another task which is in the state specified task. Or, you have not of executing.

  • Page 322: Part Code 20322, Part Code 20422

    Part code 20322 Table 95 Error codes (part code 20322) Part Error Error Message Recommended Action Severity Code Number Level 20322 107001 The processing cannot continue due to Refresh the window, then retry the an internal logic contradiction. operation. If the same problem persists despite retrying, please contact HP Technical Support.

  • Page 323: Part Code 20520, Part Code 20522

    Part code 20520 Table 97 Error codes (part code 20520) Part Error Error Message Recommended Action Severity Code Number Level 20520 107001 Failed to create a report. Check the environment. 20520 107002 Failed to create a report. Check the environment. 20520 107003 Failed to create a report.

  • Page 324: Part Code 20624, Part Code 20705

    Table 98 Error codes (part code 20522) (continued) Part Error Error Message Recommended Action Severity Code Number Level 20522 105282 A report cannot be created any more Delete unnecessary reports, then retry because the number of reports that can the operation. be created has reached the maximum.

  • Page 325

    Table 100 Error codes (part code 20705) (continued) Part Code Error Number Error Message Recommended Action Severity Level 20705 76107 The specified number of resources has Reduce the number of resources to reached the upper limit. be specified, and then retry the operation.

  • Page 326: Part Code 20721, Part Code 20722

    Part code 20721 Table 101 Error codes (part code 20721) Part Code Error Number Error Message Recommended Action Severity Level 20721 105001 No table rows are selected. Select one or more table rows. 20721 105003 No table row, or two or more table Select one table row.

  • Page 327

    Table 102 Error codes (part code 20722) (continued) Part Code Error Number Error Message Recommended Action Severity Level 20722 10531 1 You cannot delete the resource group Release the resource group that that has been assigned to a user has been assigned to the user group.

  • Page 328: Support And Other Resources, Contacting Hp, Subscription Service, Documentation Feedback, Related Information, Hp Websites

    HP StorageWorks P9000 Business Copy for Mainframe Systems User Guide HP StorageWorks P9000 Business Copy User Guide HP StorageWorks P9000 Performance for Open and Mainframe Systems User Guide HP StorageWorks P9000 Remote Web Console User Guide You can find these documents on the Manuals page of the HP Business Support Center website: http://www.hp.com/support/manuals...

  • Page 329: Conventions For Storage Capacity Values, Typographic Conventions

    Conventions for storage capacity values P9000 disk arrays use the following values to calculate physical storage capacity values (hard disk drives): 1 KB (kilobyte) = 1,000 bytes 1 MB (megabyte) = 1,000 bytes 1 GB (gigabyte) = 1,000...

  • Page 330

    WARNING! Indicates that failure to follow directions could result in bodily harm or death. CAUTION: Indicates that failure to follow directions could result in damage to equipment or data. IMPORTANT: Provides clarifying information or specific instructions. NOTE: Provides additional information. TIP: Provides helpful hints and shortcuts.

  • Page 331: Glossary

    Disk adapter. Disk controller. fence level A method of setting rejection of P9000 or XP Continuous Access write I/O requests from the host according to the condition of mirroring consistency. FICON Fibre connectivity. An FC layer 4 protocol used to map mainframe channel command and data I/O operations onto standard FC infrastructure, protocol, and FC services.

  • Page 332

    I/O slots and the number of ports available per I/O adapter. The P9000 and XP family of disk arrays supports Fibre Channel (FC) ports as well as other port types. Ports are named by port group and port letter, such as CL1-A.

  • Page 333: Index

    Index contacting HP, conventions document, storage capacity values, text symbols, disk arrays supported models, document conventions, related information, documentation HP website, providing feedback, help obtaining, technical support, related documentation, storage capacity values conventions, Subscriber's Choice, HP, symbols in text, technical support service locator website, text symbols, typographic conventions,...

This manual also for:

Xp p9500

Comments to this Manuals

Symbols: 0
Latest comments: