Continuous Access Synchronous Z Descriptions; [Cnt Ac-S Z] Add Pair - HP StorageWorks P9000 Reference Manual

Audit log user and reference guide
Hide thumbs Also See for StorageWorks P9000:
Table of Contents

Advertisement

Item
Result
Num. of Pairs

Continuous Access Synchronous Z descriptions

[Cnt Ac-S Z] Add Pair

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-S Z],Add Pair,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{M-VOL(LDKC:CU:LDEV),R-VOL(LDEV),S/N,LDKC,SSID,
Controller ID,Type,Initial Copy,Fence Level,
Copy Pace,Priority,Diff,CFW,DFW,TS,Result}
=[{0x00:0x00:0x00,0xFF,99999,0x00,0x0004,4,Sync,Entire,Never,15,
032,Auto,Only M-VOL,Required,Enable,Normal end},(snip)
-(snip)],Num. of Pairs=xx
Detailed information
Item
M-VOL(LDKC:CU:LDEV)
R-VOL(LDEV)
S/N
LDKC
SSID
Controller ID
Type
Initial Copy
Fence Level
Copy Pace
Priority
Diff
CFW
DFW
TS
Description
The result of operation.
Normal end: Normal end, Error (xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of deleted pairs.
Description
The LDKC, CU, and LDEV numbers of the volume specified to the main volume when the
pair is created.
The LDEV number of the volume specified to the remote volume when the pair is created.
The serial number of the device.
The LDKC number of the paired LDKC.
Indicates the SSID of the RCU.
The controller ID of the RCU.
The update copy mode setting; Sync: Synchronous mode
The initial copy mode setting; Entire: Copy all, None: Do not copy.
The fence level setting (the condition that MCU rejects the write operation to the main
volume.) Never: No condition, Data: S-VOL data, Status: S-VOL status.
The initial copy speed setting (the number of tracks you can copy at a time).
The priority of the initial copy operation setting (scheduling order).
The unit of the differential management setting: Auto, Cylinder, Track.
Indicates whether the setting to copy the CFW data to the remote volume is enabled or
not. Only M-VOL: Copy to main volume only is enabled Copy to R-VOL: Copy to main and
remote volume is enabled.
Indicates whether DFW use to the remote volume is set or not.
Not Required: DFW not required, Required: DFW required
Indicates whether or not the host I/O time stamp is transferred to R-VOL when the pair is
created.
Enable: transferred, Disable: not transferred
Continuous Access Synchronous Z descriptions 165

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks p9500

Table of Contents