HP StorageWorks P9000 Reference Manual page 68

Option
-CLI
-m <MU#
-pi <strings>
-find [op] [MU#]
-find[g]
68 Replication commands
Description
Specifies display for command line interface (CLI). This option displays to the same position that
defined number of columns, and displays one header. The delimiters between columns are displayed
as spaces or hyphens (-).
Display example:
Port# TargetID# Lun# Seq# Num LDEV# P/S Status Fence P-Seq# P-LDEV#
CL1-C 1 0 30053 1 274 SMPL - - - -
CL1-C 2 2 30053 1 260 P-VOL PAIR NEVER 30053 268
CL1-C 2 3 30053 1 261 P-VOL PAIR NEVER 30053 269
Displays only the cascading mirror specified by -m <MU#> option. To display the cascading mirror
descriptor for Cnt Ac-J, -m <MU#> must be specified in Continuous Access Synchronous or Business
Copy command environment. If you want to display all cascading mirror descriptor, specify "-m all"
for displaying all MUs.
Changes a strings via STDIN for -find option to "<strings>". If this option is specified, the -find option
is ignored a raw device file provided via STDIN, and <strings> is used as input. A <strings> must
be specified within 255 characters.
Executes the specified [op] using a raw device file provided via STDIN. If -pi <strings> option is
specified, this option does not use a strings via STDIN, and -pi <strings> is used as input.
Restrictions: Special files via STDIN are specified in the following ways:
HP-UX: /dev/rdsk/* or /dev/rdisk/disk*
Solaris: /dev/rdsk/*s2 or c*s2
Linux: /dev/sd... or /dev/rd..., /dev/raw/raw*.
zLinux: /dev/sd... or /dev/dasd... or /dev/rd... /dev/raw/raw*.
AIX: /dev/rhdisk* or /dev/hdisk* or hdisk*
DIGITAL or Tru64: /dev/rrz*c or /dev/rdisk/dsk*c or /dev/cport/scp*
DYNIX: /dev/rdsk/sd* or sd* for only unpartitioned raw device
IRIX64 : /dev/rdsk/*vol or /dev/rdsk/node_wwn/*vol/* or /dev/dsk/*vol or
/dev/dsk/node_wwn/*vol/*
Windows NT: hdX-Y, $LETALL, $Phys, D:\DskX\pY, \DskX\pY
Windows: hdX-Y,$LETALL,$Volume,$Phys, D:\Vol(Dms,Dmt,Dmr)X\DskY,
\Vol(Dms,Dmt,Dmr)X\DskY
For further information on LDM volumes for Windows systems, see Volume Discovery Function in the
User and Reference Guide.
OpenVMS: $1$* or DK* or DG* or GK*
Lines starting with '#' via STDIN are interpreted as comments.
Lines starting with 'quit' via STDIN are interpreted as exit.
Displays the port, target ID, and LUN (RAID storage system notation) which was mapped for LDEV
using a special file (raw device file) provided via STDIN. If target ID and LUN are Unknown for the
target device file, you should start HORCM without a description for HORCM_DEV and HORCM_INST,
and should describe the shown port, target ID, and LUN for HORCM_DEV. This option also uses the
-fx option to display the LDEV numbers in hexadecimal.
The -findg option is used to show a LUN on the host view by finding a host group (XP1024/XP128
Disk Array and later).